The effect of autoclave sterilization on Cyclic fatigue resistance of two Ni-Ti systems (an In-Vitro study) | ||||
| Egyptian Dental Journal | ||||
| Article 14, Volume 67, Issue 3 - Serial Number 4, July 2021, Page 2743-2747 PDF (463.09 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/edj.2021.71353.1576 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Ahmed Fiad  1; Medhat El Faramawy2; sarah fahmy 3
| ||||
| 1Endo, faculty of dentistry, ain shams university, cairo, egtpt | ||||
| 2Associate Professor , Endodontic Dep., Faculty of Dentistry, Ainshams University | ||||
| 3Instructor , Endodontic Dep., Faculty of Dentistry, Ainshams University | ||||
| Abstract | ||||
| The aim of this study was to evaluate the effect of sterilization on the cyclic fatigue resistance of Reciproc Blue rotary files and One Curve rotary files. Methods: For each test of the cyclic fatigue thirty files of each system were used. Ten of the thirty rotary files were used new, ten rotary files after three sterilization cycles and ten rotary files after six sterilization cycles. For cyclic fatigue testing a static model was used with a specific device, which allowed the instruments to rotate freely inside a Stainless-Steel artificial canal. Results: The results showed higher cyclic fatigue of Reciproc Blue than One Curve with no effect of sterilization on Reciproc Blue and decreeing in the cyclic fatigue resistance for One Curve. Conclusions: Reciproc Blue has higher cyclic fatigue resistance than One Curve. With no effect of sterilization on cyclic fatigue of some files while have negative effect on others. | ||||
| Keywords | ||||
| Cyclic fatigue; Reciproc Blue; One Curve | ||||
|
Statistics Article View: 211 PDF Download: 226 |
||||
