Utilizing the technique of industrial computed tomography (iCT) in reverse engineering field for industrial products | ||||
| International Design Journal | ||||
| Article 6, Volume 11, Issue 5 - Serial Number 42, September and October 2021, Page 71-80 PDF (1.39 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/idj.2021.191682 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Kareem Saber Mustafa | ||||
| Lecturer in Industrial design Dept., Faculty of Applied Arts, Beni-Suef University, Egypt | ||||
| Abstract | ||||
| Reverse engineering plays a significant role in the industrial design field by assisting industrial companies through identifying competing products within markets and clarifying the strengths and weaknesses, it also helps industrial designers and provides them with necessary knowledge and information about the nature of these products by analyzing their different parts besides the relationship of each part to the other, which helps the designers to develop either enhance their products to increase its ability to compete for other products within markets. Reverse engineering also helps significantly in the process of spreading knowledge and science between different countries by analyzing products and manufacturing methods then to study the geometrical relationship in different parts of the product, which leads to development and modernization in engineering and industrial sciences within these countries were to help them in enhancing their products thus many institutions and research centers start searching about how to develop and update methods and trials of reverse engineering then to take advantage of modern and promising techniques where these countries and institutions may reach out to maximum possible benefit through analyzing these products and revealing their engineering and industrial secrets. Therefore this research aims to shed light on industrial computed tomography (iCT) as it is the most promising technology in the reverse engineering field with its unique features rather than other used techniques. ICT technology is characterized by being non-destructive to the examined and photographed sample. Moreover, it reveals the internal and external engineering details of any shape, color, surface or material regardless of their thickness or density. The mentioned technology also assists engineers and designers in getting a wealth of information of the examined and photographed body by determining the type of material, the shape of the fibers and the areas of stress in that body ....etc. In the research process, the researcher relies upon the descriptive approach to provide accurate scientific research on what that technology is and how to take its advantages in the reverse engineering field besides providing information to industrial designers to recognize the modern and promising methods in the reverse engineering field to serve the filed of industrial product design. | ||||
| Keywords | ||||
| Reverse Engineering; Industrial Products; Industrial Computed Tomography; Industrial Designer | ||||
| References | ||||
1. Alkuazi, Salah .(2017): altakamul bayn mudakhalaa alhandasat aleaksiat walkulfat ealaa 'asas alkhasayis - dirasatan tatbiqiatan fa alsharikat aleamat lilsinaeat al'iiliktruniat ,bahath manshur ,majalat al'iidarat walaiqtisadi, almujalid alkhamis , aleadad alttasie eshr, aleiraq 2. Carmignato, S., Dewulf, W., & Leach, R. (2018). Industrial X-ray computed tomography: Springer 3. Datar, S. M., & Rajan, M. V. (2018). Horngren’s cost accounting: a managerial emphasis: Pearson. 4. De Chiffre, L., Carmignato, S., Kruth, J.-P., Schmitt, R., & Weckenmann, A. (2014). Industrial applications of computed tomography. CIRP annals, 63(2), 655-677. 5. Flisch, A., Wirth, J., Zanini, R., Breitenstein, M., Rudin, A., Wendt, F., . . . Golz, R. (1999). Industrial computed tomography in reverse engineering applications. DGZ-fP-Proceedings BB, 4(7), 45-53. 6. Horngren, C. T. (2009). Cost accounting: A managerial emphasis, 13/e: Pearson Education India. 7. Kruth, J. P., Bartscher, M., Carmignato, S., Schmitt, R., De Chiffre, L., & Weckenmann, A. (2011). Computed tomography for dimensional metrology. CIRP annals, 60(2), 821-842. 8. Kumar, A., Jain, P. K., & Pathak, P. M. (2013). Reverse engineering in product manufacturing: an overview. DAAAM international scientific book, 39, 665-678. 9. Mahmawad, Hanaa.(2018): tuknulujiaa altaswir bialasheae- albarnamaj altadribaa litahil almudrisin bimudrisat aldabeat alfaniyat liltuknulujia alnawawita-murkiz albihwth alnawawiat -hyiat alttaqat aldhariyat - jumhuriat misr alearabiati. 10. Noel, J. (2008). Advantages of CT in 3D scanning of industrial parts. 3D Scanning Technologies Magazine, 1(3), 18-23 11. Pal, D., Ravi, D. B., Bhargava, L., & Chandrasekhar, U. (2005). Computer-Aided Reverse Engineering for Rapid Replacement Parts: A Case Study. Defence Science Journal. 12. Raja, V. (2008). Introduction to reverse engineering. In Reverse Engineering (pp. 1-9): Springer. 13. Sadaoui, S. E., Mehdi-Souzani, C., & Lartigue, C. (2018). Combining a touch probe and a laser sensor for 3D part inspection on CMM. Procedia CIRP, 67, 398-403. 14. https://www.kau.edu.sa/Content-0012720-AR-85050 (Accessed 22/1/2021) | ||||
|
Statistics Article View: 252 PDF Download: 287 |
||||
