An expeirmental investigation for the effect of surface grinding parameters on the produced sureface roughness
Salem, M., Ibrahim, A., Mohamed, S. (2022). An expeirmental investigation for the effect of surface grinding parameters on the produced sureface roughness. EKB Journal Management System, 7(4), 143-149. doi: 10.21608/bjas.2022.254711
M.M. Salem; A.A. Ibrahim; S.S. Mohamed. "An expeirmental investigation for the effect of surface grinding parameters on the produced sureface roughness". EKB Journal Management System, 7, 4, 2022, 143-149. doi: 10.21608/bjas.2022.254711
Salem, M., Ibrahim, A., Mohamed, S. (2022). 'An expeirmental investigation for the effect of surface grinding parameters on the produced sureface roughness', EKB Journal Management System, 7(4), pp. 143-149. doi: 10.21608/bjas.2022.254711
Salem, M., Ibrahim, A., Mohamed, S. An expeirmental investigation for the effect of surface grinding parameters on the produced sureface roughness. EKB Journal Management System, 2022; 7(4): 143-149. doi: 10.21608/bjas.2022.254711

An expeirmental investigation for the effect of surface grinding parameters on the produced sureface roughness

Benha Journal of Applied Sciences
Article 19, Volume 7, Issue 4, April 2022, Page 143-149  XML PDF (648.18 K)
Document Type: Original Research Papers
DOI: 10.21608/bjas.2022.254711
View on SCiNiTO View on SCiNiTO
Authors
M.M. Salem1; A.A. Ibrahim2; S.S. Mohamed2
1Manufacturing Engineering and Production Technology Dept., Modern Academy, Egypt
2Mechanical Engineering Dept., Shoubra Faculty of Engineering, Benha Univ., Benha, Egypt
Abstract
Surface grinding in industry is used as finishing process. The quality of the finished surface is largely dependent on the
selected machining parameters. There is many other factors contribute in the surface quality, but the major contribution to
improve the surface quality can be achieved by controlling the machining parameters.
Grinding concept is very complex random cutting process between many cutting edges on the wheel circumference and the
workpiece. The functional behavior of machined components can be enhanced by the grinding process, so proper selection of the
grinding parameters can result in improving the surface integrity. So that, understanding the surface integrity imparted by
grinding is very important.
This paper introduced an experimental investigation to study the relation between some selected input parameters on the
surface quality; the behavior of the grain along with the machining time is also investigated.
It is concluded that the surface roughness is influenced by changing the depth of cut and the feed rate. Increasing feed rate
and depth of cut increase the normal and tangential forces; leading to higher surface roughness.
The depth of cut is the most significant parameter that affecting surface roughness.
The machining time affect the quality of the machined surfaces.
Keywords
Surface grinding parameters; Surface Roughness; ANOVA; SNR; Grain Condition
Statistics
Article View: 63
PDF Download: 155