Young’s modulus of tungsten at elevated temperatures using synchronous laser shadow vibrometry
Ayoub, H., El-sherif, A., Hassan, H., Khairy, S. (2018). Young’s modulus of tungsten at elevated temperatures using synchronous laser shadow vibrometry. EKB Journal Management System, 9(International Conference on Mathematics and Engineering Physics (ICMEP-9)), 1-21. doi: 10.21608/icmep.2018.29589
H. S. Ayoub; Ashraf F. El-sherif; H. H. Hassan; S. A. Khairy. "Young’s modulus of tungsten at elevated temperatures using synchronous laser shadow vibrometry". EKB Journal Management System, 9, International Conference on Mathematics and Engineering Physics (ICMEP-9), 2018, 1-21. doi: 10.21608/icmep.2018.29589
Ayoub, H., El-sherif, A., Hassan, H., Khairy, S. (2018). 'Young’s modulus of tungsten at elevated temperatures using synchronous laser shadow vibrometry', EKB Journal Management System, 9(International Conference on Mathematics and Engineering Physics (ICMEP-9)), pp. 1-21. doi: 10.21608/icmep.2018.29589
Ayoub, H., El-sherif, A., Hassan, H., Khairy, S. Young’s modulus of tungsten at elevated temperatures using synchronous laser shadow vibrometry. EKB Journal Management System, 2018; 9(International Conference on Mathematics and Engineering Physics (ICMEP-9)): 1-21. doi: 10.21608/icmep.2018.29589

Young’s modulus of tungsten at elevated temperatures using synchronous laser shadow vibrometry

The International Conference on Mathematics and Engineering Physics
Article 15, Volume 9, International Conference on Mathematics and Engineering Physics (ICMEP-9), April 2018, Page 1-21  XML PDF (2.66 MB)
Document Type: Original Article
DOI: 10.21608/icmep.2018.29589
View on SCiNiTO View on SCiNiTO
Authors
H. S. Ayoub1; Ashraf F. El-sherif2; H. H. Hassan1; S. A. Khairy1
1Department of Physics, Faculty of Science, Cairo University, Egypt.
2Laser Photonics Research Center, Engineering Physics Department, Military Technical College, Cairo, Egypt.
Abstract
Abstract:
This paper presents the use of an improved laser shadowgraphy method for measuring the dynamic elastic moduli of tungsten, from room temperature to near melting point. The method is based on measuring the frequency of impulse induced longitudinal vibration of a tungsten filament, subject to joule heating. The natural resonance frequency of the filament is obtained by lock-in synchronous photo-detection of the laser generated filament shadowgraph. The correlation between the filament natural frequency and its temperature lead to the calculation of shear modulus at variable temperatures, the tensile and bulk modului of tungsten. The results were compared to those obtained by laser Doppler vibrometry of a tungsten wire induced by pulsed current technique. Our method permitted a wider measuring temperature range and an easier calculation procedure. The used setup was simple, non-destructive, non-contacting and accurate, enabling low cost vibrometry measurements that help in future synthesis and test of new grades of refractory materials, deployed as plasma facing material in the latest fusion reactor or super alloys in critical applications.
Keywords
Tungsten; elasticity moduli; elevated temperatures; shadowgraphy; laser vibrometry; lock-in amplifier; low cost
Statistics
Article View: 351
PDF Download: 1,359