Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study)
Abdelhalim, A., Samhan, T., Shokry, T. (2023). Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study). EKB Journal Management System, 3(1), 36-49. doi: 10.21608/jfcr.2023.166011.1035
Ahmed Magdy Abdelhalim; Talaat Samhan; Tamer Shokry. "Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study)". EKB Journal Management System, 3, 1, 2023, 36-49. doi: 10.21608/jfcr.2023.166011.1035
Abdelhalim, A., Samhan, T., Shokry, T. (2023). 'Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study)', EKB Journal Management System, 3(1), pp. 36-49. doi: 10.21608/jfcr.2023.166011.1035
Abdelhalim, A., Samhan, T., Shokry, T. Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study). EKB Journal Management System, 2023; 3(1): 36-49. doi: 10.21608/jfcr.2023.166011.1035

Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study)

Journal of Fundamental and Clinical Research
Article 9, Volume 3, Issue 1, June 2023, Page 36-49  XML PDF (830.82 K)
Document Type: Original research articles
DOI: 10.21608/jfcr.2023.166011.1035
View on SCiNiTO View on SCiNiTO
Authors
Ahmed Magdy Abdelhalim email 1; Talaat Samhanorcid 2; Tamer Shokryorcid 3
1Fixed Prosthodontics Department, Faculty of Oral and Dental Medicine, Misr International University, Cairo, Egypt.
2Fixed Prosthodontics Department, Faculty of Oral and Dental Medicine, Misr International University, Cairo, Egypt
3Fixed Prosthodontics Department, Faculty of Oral and Dental Medicine, Al-Azhar University, Cairo, Egypt
Abstract
Background: CAD/CAM Composite is one of the esthetic milled restorations. It has high esthetic properties and modulus of elasticity close to that of dentin. The color stability of composite CAD/CAM restorations is still under investigation. Aim: To evaluate the color stability of milled hybrid composite and hybrid ceramic compared to lithium disilicate after Artificial Accelerated Aging. Materials and Methods: Twenty-seven disk shaped specimens (10 mm X 2mm) were fabricated in standardized manner. Samples were divided into three equal groups (n=9) according to the material type: Lithium disilicate ceramic (IPS e.max CAD), Hybrid Ceramic (Vita Enamic) and Hybrid composite (Tetric CAD). Color measurements of the three milled materials were assessed before and after Artificial Accelerated Aging (AAA) in weathering machine for 300 hours using a spectrophotometer based on CIE L*a*b* relative to the standard illumination D65. Color difference was obtained by calculating the difference in color measurements of the specimens before and after accelerated aging using the formula ∆E= [(∆L*) 2 + (∆a*) 2 + (∆b*) 2] ½. Results: There was a statistically significant difference between ΔE of different ceramic types. Tetric CAD showed the highest mean E (4.29) while there was no statistical significance difference between Vita Enamic and IPS e.max CAD (3.02 and 2.94 respectively). Conclusion: Artificial accelerated aging caused clinically unacceptable color changes in Tetric CAD while caused perceptible but clinically acceptable color changes in Vita Enamic and IPS e.max CAD. Color changes after artificial aging is related to the chemical composition of the material.
Keywords
Artificial Accelerated Aging; Color Stability; Monolithic Esthetic Restorations; CAD/CAM
Statistics
Article View: 195
PDF Download: 324