DESIGN AND PERFORMANCE OF WES/PEM FUEL CELLS HYBRID ELECTRIC SYSTEM | ||||
| The International Conference on Electrical Engineering | ||||
| Article 64, Volume 9, 9th International Conference on Electrical Engineering ICEENG 2014, May 2014, Page 1-17 PDF (1.16 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/iceeng.2014.30490 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Hassan H. EL-Tamaly1; Ahmed M. Abd-El wahab2 | ||||
| 1Prof. Dr., Professor of Electrical Power Engineering, Faculty of Engineering, Minia University, Elminia Egypt. | ||||
| 2Eng., Engineer of Electrical Power. | ||||
| Abstract | ||||
| This paper studies the design and performance of a WES / PFCS hybrid electrical power system. This system consists of Wind Energy System, WES, and Pem fuel cell system PFCS. The design of this system depends on the hourly energy balance technique. When the power output from WES, Pew , exceeds the load demand, PL , the exceed power used by the alkaline electrolyser to produce hydrogen . Then the H2 is compressed and stored in pressurized storage tanks. Also, when Pew < PL this means that there is deficit power and the stored H2 is utilized for generation electrical power by the PFCS to overcome the deficit on the system. The methodology which developed here has been applied on EL-Zafarana site as a case study. EL-Zafarana is a remote site located at the coast of the red sea, Egypt. | ||||
| Keywords | ||||
| design; performance; WES; PFCS; Electrolyser | ||||
|
Statistics Article View: 133 PDF Download: 217 |
||||
