Novel control algorithm of VSC based shunt active power filter | ||||
| The International Conference on Electrical Engineering | ||||
| Article 132, Volume 6, 6th International Conference on Electrical Engineering ICEENG 2008, May 2008, Page 1-15 PDF (426.16 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/iceeng.2008.34495 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Osama Ahmed Mahgoud; Mahmoud Abdullah El-Sawi | ||||
| Faculty of Engineering, Cairo University, Cairo, Egypt. | ||||
| Abstract | ||||
| Abstract: Active power filters (APF) have been developed for over the past thirty years as a possible replacement for passive L-C power filters. Over the course of its development, many configurations have been designed. The shunt active power filter is one type of active power filter. A detailed generic development system for Shunt Active Power Filter is introduced in this paper, and its simulation model is presented in MATLAB / Simulink environment. The model presented considers several issues like: the practical range and accuracy limitations on the obtained real world measurements by the real time controller, a proposed starting procedure for the APF to as a self-tuning technique and an improved zero crossing compensator independent of the sampling frequency. Also, a new space vector based control algorithm is tested on this model and its simulation results are presented. | ||||
| Keywords | ||||
| Shunt active power filter; Zero crossing compensation; self-tuning; Space vector control | ||||
|
Statistics Article View: 101 PDF Download: 203 |
||||
