OPTIMIZATION OF MULTI-FIDELITY DATA USING CO-KRIGING FOR HIGH DIMENSIONAL PROBLEMS
Elsayed, K., Lacor, C. (2014). OPTIMIZATION OF MULTI-FIDELITY DATA USING CO-KRIGING FOR HIGH DIMENSIONAL PROBLEMS. EKB Journal Management System, 16(16th International Conference on Applied Mechanics and Mechanical Engineering.), 1-25. doi: 10.21608/amme.2014.35593
K. Elsayed; C. Lacor. "OPTIMIZATION OF MULTI-FIDELITY DATA USING CO-KRIGING FOR HIGH DIMENSIONAL PROBLEMS". EKB Journal Management System, 16, 16th International Conference on Applied Mechanics and Mechanical Engineering., 2014, 1-25. doi: 10.21608/amme.2014.35593
Elsayed, K., Lacor, C. (2014). 'OPTIMIZATION OF MULTI-FIDELITY DATA USING CO-KRIGING FOR HIGH DIMENSIONAL PROBLEMS', EKB Journal Management System, 16(16th International Conference on Applied Mechanics and Mechanical Engineering.), pp. 1-25. doi: 10.21608/amme.2014.35593
Elsayed, K., Lacor, C. OPTIMIZATION OF MULTI-FIDELITY DATA USING CO-KRIGING FOR HIGH DIMENSIONAL PROBLEMS. EKB Journal Management System, 2014; 16(16th International Conference on Applied Mechanics and Mechanical Engineering.): 1-25. doi: 10.21608/amme.2014.35593

OPTIMIZATION OF MULTI-FIDELITY DATA USING CO-KRIGING FOR HIGH DIMENSIONAL PROBLEMS

The International Conference on Applied Mechanics and Mechanical Engineering
Article 43, Volume 16, 16th International Conference on Applied Mechanics and Mechanical Engineering., May 2014, Page 1-25  XML PDF (2 MB)
Document Type: Original Article
DOI: 10.21608/amme.2014.35593
View on SCiNiTO View on SCiNiTO
Authors
K. Elsayed1, 2; C. Lacor3
1Postdoc researcher, Department of Mechanical Engineering, Vrije Universiteit Brussel, Pleinlaan 2 -1050 Brussels- Belgium.+
2Assistant Professor, Helwan University, Faculty of Engineering - Mattaria, Department of Mechanical Power Engineering, Masaken El-Helmia, 11718 Cairo, Egypt.
3Professor, Department of Mechanical Engineering, Vrije Universiteit Brussel, Pleinlaan 2 -1050 Brussels- Belgium.
Abstract
ABSTRACT
This paper deals with an efficient and multi-fidelity design strategy for high dimensional industrial problems. The most significant factors have been determined based on the Muschelknautz method of modeling (MM) using the screening approach. For cyclone separator, only four (from seven) geometrical parameters are significant. An optimized sampling plan based on random Latin hypercube (LHS) has been used to fit Co-Kriging based on CFD data and an analytical model for estimation of pressure drop. Co-Kriging exhibits better accuracy than ordinary Kriging and blind Kriging if only the high fidelity data is used. For global optimization, the Co-Kriging surrogate in conjunction with genetic algorithms (GA) is used. CFD simulations based on the Reynolds stress turbulence model are also used in this study. A new set of geometrical ratios (design) has been obtained (optimized) to achieve minimum pressure drop. A comparison of numerical simulation of the new design and the Stairmand design confirms the superior performance of the new design compared to the Stairmand design.
Keywords
Surrogate Models; Kriging; Co-Kriging; Blind Kriging; Surrogate based optimization
Statistics
Article View: 135
PDF Download: 257