Modeling and Simulation of a Control System for a Remotely Operated Tracked Vehicle | ||||
The International Conference on Applied Mechanics and Mechanical Engineering | ||||
Article 49, Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., May 2010, Page 1-18 PDF (659.28 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/amme.2010.37671 | ||||
View on SCiNiTO | ||||
Authors | ||||
A. Eliewa1; M. Atef1; M. Elhaddad2; R. Khodary1 | ||||
1Egyptian Armed Forces. | ||||
2Higher Institute of Technology-10th of Ramadan. | ||||
Abstract | ||||
Abstract: This paper deals with a proposal for building up a control module to convert the APC M113 into a remotely controlled vehicle. The driving of the vehicle has been simplified and performed through a simple control lever similar to the computer joystick which is able to control the vehicle driving systems; steering and braking system, accelerator pedal, and gear shifting lever. The necessary sensors and actuators have been added to the conventional M113. A microcontroller is used as a control unit; the required interfacing circuits were designed. LABVIEW Software® is used as the interface between the microcontroller and the remote control station. Finally a mathematical model is prepared to simulate the proposed control module and measure its response and stability | ||||
Keywords | ||||
Unmanned systems; Electronic control; Microcontroller | ||||
Statistics Article View: 129 PDF Download: 164 |
||||