A POSTERIORI ERROR INDICATOR FOR COULOMB’S FRICTIONAL CONTACT | ||||
The International Conference on Applied Mechanics and Mechanical Engineering | ||||
Article 44, Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., May 2008, Page 74-86 PDF (438.85 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/amme.2008.39270 | ||||
View on SCiNiTO | ||||
Authors | ||||
BECHEUR A.1; TAHAKOURT A.2; COOREVITS P.3 | ||||
1Assistant Professor, Laboratoire de Technologie des Matériaux et de Génie des Procédés LTMGP. University of Bejaia. Route de Tharga-ouzemour.. 06000 BEJAIA. Algeria. | ||||
2Professor, Laboratoire de Technologie des Matériaux et de Génie des Procédés LTMGP. University of Bejaia. Route de Tharga-ouzemour.. 06000 BEJAIA. Algeria. | ||||
3Professor, Laboratoire des Technologies Innovantes LTI, EA3899, Université de Picardie Jules Verne, France. | ||||
Abstract | ||||
ABSTRACT In this paper, we present a new error indicator for the frictional contact problem governed by Coulomb’s law. This indicator is built over the combination of two known methods. The first concerns the error obtained from the projection techniques where super convergence properties are used for smoothing the finite element stress fields. The second method takes into account the errors in the constitutive relation of the contact zones. By using both the error indicator and procedures of mesh adaptivities, we show example of optimised computations. | ||||
Keywords | ||||
a posteriori error indicator; Coulomb’s friction law; Finite Elements; smoothing stress fields; contact constitutive relations | ||||
Statistics Article View: 92 PDF Download: 177 |
||||