APPLICATION OF THE METHODS OF SELECTION OF GEAR BOX RATIOS TO PASSENGER CARS
SHAABAN, S., HASSAN, S. (1986). APPLICATION OF THE METHODS OF SELECTION OF GEAR BOX RATIOS TO PASSENGER CARS. EKB Journal Management System, 2(2nd Conference on Applied Mechanical Engineering.), 299-314. doi: 10.21608/amme.1986.57056
SAYED SHAABAN; SAID A. HASSAN. "APPLICATION OF THE METHODS OF SELECTION OF GEAR BOX RATIOS TO PASSENGER CARS". EKB Journal Management System, 2, 2nd Conference on Applied Mechanical Engineering., 1986, 299-314. doi: 10.21608/amme.1986.57056
SHAABAN, S., HASSAN, S. (1986). 'APPLICATION OF THE METHODS OF SELECTION OF GEAR BOX RATIOS TO PASSENGER CARS', EKB Journal Management System, 2(2nd Conference on Applied Mechanical Engineering.), pp. 299-314. doi: 10.21608/amme.1986.57056
SHAABAN, S., HASSAN, S. APPLICATION OF THE METHODS OF SELECTION OF GEAR BOX RATIOS TO PASSENGER CARS. EKB Journal Management System, 1986; 2(2nd Conference on Applied Mechanical Engineering.): 299-314. doi: 10.21608/amme.1986.57056

APPLICATION OF THE METHODS OF SELECTION OF GEAR BOX RATIOS TO PASSENGER CARS

The International Conference on Applied Mechanics and Mechanical Engineering
Article 35, Volume 2, 2nd Conference on Applied Mechanical Engineering., May 1986, Page 299-314  XML PDF (2.45 MB)
Document Type: Original Article
DOI: 10.21608/amme.1986.57056
View on SCiNiTO View on SCiNiTO
Authors
SAYED SHAABAN1; SAID A. HASSAN2
1Col Dr., Chief of Dept. of Motor Vehicles, Military Technical College, Cairo, Egypt.
2COL DR., Lecturer at the Dept. of Motor Vehicles, Military Technical College, Cairo, Egypt.
Abstract
Selection of ratios in mechanical transmission of motor vehicles can be done according to various mathematical prog-ressions such as : arithmatic, harmonic and geometric with constant and increasing roots. In a paper presented by the same authors, a comparison of the methods of selecting the gear ratios has been made. This was done by calculating the wasted power due to their stepped tractive effort - speed characteristics relative to the ideal one with continuous power transmission. it has been concluded that the gemetric progression would give the least wasted power. This conclusion was based on calcula-tions considering the data of only one Jeep car. The objective of this paper is to prove the validity of the above mentioned conclusion. In this regard, same method of comparison was applied to 14 small and medium class dif-ferent passenger cars having engines of swept volume between 0,9 and 1.6 litre.
Statistics
Article View: 91
PDF Download: 177