One-bath One-stage Dyeing Process of Polyamide/polyester Blend Fabric Using Carbocyclic Vat Dyes | ||||
| Egyptian Journal of Chemistry | ||||
| Article 27, Volume 62, Special Issue (Part 2) Innovation in Chemistry, December 2019, Page 819-830 PDF (913.9 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2019.19575.2189 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Abdalla. A. Mousa  1; Yehia A. Youssef 2; Khalid M. Abd El Moteleb3; Ashraf Wasfy4
| ||||
| 1Professor, Dye chemistry and textile coloration technology Head of Dyeing, Printing & Auxiliaries Dept. Textile Research Division, National Research Centre, | ||||
| 2Dyeing, Printing and Auxiliaries Department, Textile Research Division, National Research Centre, Cairo 12622, Egypt | ||||
| 3Chemistry Department, Faculty of Science, Benha University, Benha, 13518, Egypt. | ||||
| 4Chemistry Department, Faculty of Science, Benha University | ||||
| Abstract | ||||
| The dyeing behavior of selected both carbocyclic and heterocyclic vat dyes on polyamide PA and polyester PET fabrics have been examined. Factors affecting dyeability such as sodium hydrosulphite concentration, dyeing temperature and dye concentration were also studied. It was found that color strength (K/S) values of the carbocyclic vat dyes on PA and PET are high, which confirms the usefulness of these dyes for dyeing PA and PET fabrics in a neutral medium (acid leuco) at the specific temperature 120°C with very good fastness properties. However, K/S values obtained using heterocyclic vat dyes are very low compared with those obtained using carbocyclic vat dyes. The results indicate the possibility of using carbocyclic vat dyes for the one-bath and one-stage dyeing of PA/PET blend fabric with very good fastness properties. | ||||
| Keywords | ||||
| Blends dyeing; one-bath dyeing process; vat dyeing; vat dyeing of polyamide/polyester blend fabric | ||||
|
Statistics Article View: 436 PDF Download: 351 |
||||
