Methylene blue removal from wastewater using silica/corncob nanocomposite | ||||
International Journal of Development | ||||
Article 7, Volume 8, Issue 1, 2019, Page 81-93 PDF (595.46 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/idj.2019.64039 | ||||
View on SCiNiTO | ||||
Authors | ||||
Kholod Kamal1; Mohamed Saeid Attia2; Nabila Ammar1; Enas Mohamed Abou-Taleb 1 | ||||
1Water Pollution Research Department, National Research Center, El-Buhouth St., Dokki, Cairo P.O. 12622, Egypt | ||||
2Chemistry Department, Faculty of Science, Ain Shams University, Abbassia, 11566, Cairo, Egypt | ||||
Abstract | ||||
Silica/corncob nanocomposite was prepared for remove of methylene blue. Fourier transform infrared (FTIR) spectrophotometry, X-ray diffraction (XRD), Scanning electron microscopy (SEM), dispersive energy x-ray spectrometer (EDX), High-resolution transmission electron microscopy (HR-TEM), and Zeta potential measurements were performed to reveal functionality, crystal structure, morphology, and point of zero charge of the synthesized sorbents. The effect of contact time, initial dye concentration, pH and sorbent dose were evaluated to study the removal efficiency and the adsorption capacity for silica/corncob nanocomposite. The equilibrium concentration of dye was measured by spectrophotometer. Adsorption isotherms and kinetics were also evaluated and reported. The removal efficiency of silica/corncob nanocomposite was (98%). | ||||
Keywords | ||||
Corncob; Silica nanocomposite; methylene blue; sorption | ||||
Statistics Article View: 294 PDF Download: 433 |
||||