Effect of Using Plastic Waste on Mechanical Properties of Concrete | ||||
| ERJ. Engineering Research Journal | ||||
| Article 6, Volume 40, Issue 3, July 2017, Page 237-245 PDF (679.34 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/erjm.2017.66351 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Haider K. Ammash1; Sadjad A. Hemzah2; Rasha Jasim3 | ||||
| 1Assist. Prof. Department of Civil Engineering, University of Al-Qadisiyah, Iraq | ||||
| 2Lecture Department of Civil Engineering, University of Al-Qadisiyah, Iraq. | ||||
| 3Assist. Lecture Department of Civil Engineering, University of Al-Qadisiyah, Iraq. | ||||
| Abstract | ||||
| The present study deals with the effect of using plastic waste on mechanical properties of concrete. The experimental work consists of adding manually formed serrated plastic fibers by ratios of (1%, 2% and 3%) of cement weight. Different lengths of fibers were used for each ratio with a constant width of 5 mm. It was noticed from laboratory tests that the addition of plastic fibers improves the compressive strength, tensile strength and modulus of rupture of concrete, by different ratios, about 20%, furthermore it could be a sufficient method to get rid of plastic waste. | ||||
| Keywords | ||||
| Recycle Plastic Waste; Mechanical Properties; Concrete; Compressive strength; flexural strength | ||||
|
Statistics Article View: 154 PDF Download: 188 |
||||
