Utilizing Metal Wires to Enhance Embroidery Sculpture | ||||
International Design Journal | ||||
Article 6, Volume 9, Issue 3 - Serial Number 31, July 2019, Page 71-84 PDF (1.21 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/idj.2019.82748 | ||||
View on SCiNiTO | ||||
Authors | ||||
Attiat Ali Abd El Hakeem1; Asmaa Ali Ahmed Mohamed2 | ||||
1Lecturer of clothing and textiles, Department of Home Economics, Faculty of Specific Education, Assiut University | ||||
2Assistant Professor of clothing and textiles, Department of Home Economics, Faculty of Specific Education, Assiut University | ||||
Abstract | ||||
In this research experiment, the raw material of metal wire used for formation and sculpture was chosen to obtain designs that are suitable for portraits and implemented using the technique of hand embroidery, which is the stitches of running, drown threaded work, fabric and finally the woven stitch and the output of the research experiment with pieces of executed art pieces suitable for portraits. Objective of the research experiment : To identify the characteristics and features of the metal wire, techniques of sculpture and formation then execution by different hand embroidery techniques The research experiment has been applied to a number of 35 designs and executed by different hand embroidery techniques in a distinct and technical manner. The executed pieces then evaluated by specialized professors using an evaluation card. The research experiment results showed that the skill of pairing between more than one technique, the sculptural formation and manual embroidery achieved a unique harmony in the executed art piece, as well as the cohesion, harmony and the affinity, which led to the emergence of the executed piece in one entity with consistent parts. the stitching different embroidery and different types and contact and the uniformity and uniformity between the colors. Furthermore the harmony between different embroidery stitches with different types , touches , mating and uniformity between colors led to the surface diversity of the executed piece, which indicated that, handling of raw metal wires with an innovative technical vision to introduce new entrances and starting points for the executed pieces of art commensurate with our contemporary life.. | ||||
Keywords | ||||
Sculpture; Embroidery; Metal Wires | ||||
References | ||||
1- امل عویس صابر (2008):الامکانات التشکیلیة للقماش والافادة منها فی انتاج مشغولات فنیة مستحدثة برؤیة نحتیة، بحث منشور، المؤتمر الدولی السادس، المرکز القومی للبحوث، القاهرة 2- جولان حسین علوان (2016 ): بنیة التکوین فی النحت الحرکی ،مجلة کلیة الاداب العدد93،کلیة الاداب، جامعه القاهرة. 3- حسین حسین طه، مها الشیمی (2016):رؤیة تشکیلیة تکاملیة بین مادتی التصمیم والنسیج کمدخل لبناء اعمال فنیة ثلاثیة الابعاد (دراسة تجریبیة )، مجلة بحوث التربیة النوعیة، العدد (44) اکتوبر، جامعة المنصورة. 4- حیدرعید نجم (2000 ):الواقع والواقعیة بین الوجود الفیزیائی والمتخیل المیتافیزیقی ،مجلة الاکادیمی ،مجلة متخصصة فی الفنون ،العدد(28)، المجلد الثامن ،السنه الثامنة ،کلیه الفنون الجمیلة، جامعه بغداد 5- سلامه محمد علی ابراهیم (2014):معالجات تشکیلیة للطائر فی فن التشکیل النحتی المعاصر ،المؤتمر السنوی العربی التاسع – الدولی السادس ،المجلد الاول ،کلیة التربیة النوعیة، جامعة المنصورة 6- سلامه محمد علی ابراهیم (2014): الکرة وتداعیات الفراغ فی فن التشکیلالنحتی المعاصر 7- ،المؤتمر السنوی العربی التاسع – الدولی السادس ،المجلد الاول ،کلیة التربیة النوعیة، جامعة المنصورة 8- سهام زکی ،احکام سلیمان ،ثریا نصر (2008): موسوعة التطریز – تاریخه وفنونه وجودته ،عالم الکتب، القاهرة. 9- شریف مسعد عارف(2010):الابعاد الجمالیة والتشکیلیة للسلک المعدنی بحث منشور ،مجلة البحوث التربویة ،کلیة التربیة، جامعة الحائل ،العدد الحادی عشر 10- عطیات علی عبد الحکیم (2019): الآجور وایقاعه علی مکملات الملابس ،بحث قید النشر، مجله علوم وفنون دراسات وبحوث، العدد الاول، المجلد(31)، جامعة حلوان 11- نجوان انیس (2014):الامکانات التشکیلیة للأسلاک المعدنیة کمدخل لأثراء مجال النسجیات الیدویة ،المؤتمر السنوی العربی الثامن – الدولی الخامس ،ابریل 2013، کلیة التربیة النوعیة، جامعة المنصورة. 12- وائل فتحی ابراهیم (2017):العلاقة المتبادلة بین الکتل الجزئیة المکونة للعمل المجسم والاسطح الخارجیة لها والاستفادة منها فی استحداث تصمیمات للتطریز، دکتوراه منشوره کلیه التربیة النوعیة، جامعة الفیوم. 13- Arline M. Fisch(1999):Textile Techniques in Metal ,Published by lark books, Ascheville , U.S.A
15- Https://www.pinterest.com. | ||||
Statistics Article View: 241 PDF Download: 321 |
||||