Enhancement of Power Harvesting by Tuning Moment of Inertia | ||||
| Port-Said Engineering Research Journal | ||||
| Article 10, Volume 25, Issue 1, March 2021, Page 83-90 PDF (731.96 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/pserj.2020.22169.1029 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Shahenda Mohamed  1; Ebtisam Abdel-Gwad2
| ||||
| 1Production Engineering and Mechanical Design Department, Faculty of Engineering, Port Said University, Port Said, Egypt | ||||
| 2Professor, Production Engineering and Mechanical Design Department, Faculty of Engineering, Port Said University, Port Said, Egypt | ||||
| Abstract | ||||
| This investigation examines the design of an innovative independent mechanism for tuning the resonant frequency and thus generate greater amounts of energy. The proposed concept is based on adjusting the resonant frequency by automatically modifying the mass moment of inertia. A frequency tuning algorithm is used to maintain the system in the case of resonant continuously, and that by change the proof mass position within the tuning range. The electromagnetic energy harvester is used to convert the vibration energy into electrical energy. The proposed design is analyzed using the methodology of approximate single degree of freedom system to study the effect of the mass position on Eigen-frequency and also to determine the response of the system as well as the harvested power. Analytical results were confirmed and verified to high accuracy with laboratory results. It is worth mentioning that this proposed design is suitable for low frequencies and can be considered as a good step towards the production of autonomous energy harvesters. | ||||
| Keywords | ||||
| Vibration energy harvester; Tuning; Resonant; Electromagnetic | ||||
|
Statistics Article View: 232 PDF Download: 210 |
||||
