Dobby Loom Using in the Production of Bed Covers with Innovative Designs
El-Tantawy, S., Mahmoud, A. (2016). Dobby Loom Using in the Production of Bed Covers with Innovative Designs. EKB Journal Management System, 6(3), 231-242. doi: 10.12816/0036511
Samir Ahmed El-Tantawy; Amal Ahmed Mohamed Mahmoud. "Dobby Loom Using in the Production of Bed Covers with Innovative Designs". EKB Journal Management System, 6, 3, 2016, 231-242. doi: 10.12816/0036511
El-Tantawy, S., Mahmoud, A. (2016). 'Dobby Loom Using in the Production of Bed Covers with Innovative Designs', EKB Journal Management System, 6(3), pp. 231-242. doi: 10.12816/0036511
El-Tantawy, S., Mahmoud, A. Dobby Loom Using in the Production of Bed Covers with Innovative Designs. EKB Journal Management System, 2016; 6(3): 231-242. doi: 10.12816/0036511

Dobby Loom Using in the Production of Bed Covers with Innovative Designs

International Design Journal
Article 17, Volume 6, Issue 3 - Serial Number 19, July 2016, Page 231-242  XML PDF (961.04 K)
Document Type: Original Article
DOI: 10.12816/0036511
View on SCiNiTO View on SCiNiTO
Authors
Samir Ahmed El-Tantawy1; Amal Ahmed Mohamed Mahmoud2
1Professor, Spinning, weaving, and Knitting Department, Faculty of Applied Arts, Helwan University
2Assistant Professor, Home Economics Department, Faculty of Agriculture, Zagazig University
Abstract
Upholstery Fabrics are the most important types of fabrics which have a great precision and interest during their production in order to obtain high quality attributes of performance and appearance suitable for their uses.  However, a little attention is paid for the designs and colors, although the high distinguished value and the importance of this kind of fabrics. So, the objective of this study was to produce bed covers with innovative designs using cotton as raw material with different colors and count threads weaving them as wefts by Dobby Loom.                                                                                             
Nine samples with different nine designs were carried out; every design was performed with four wefts where the color was identical for each two wefts. The samples were divided in three groups; each group had different three designs, the average of wefts count was 45, 40, 35 English count (Ne) for the first, second and the third group, respectively. Each group was evaluated for Water Absorption, Tensile Strength, Bending Angle and loss of Weight after Abrasion (%) . the mentioned analyses were carried out at National Research Center, Cairo, Egypt.                                                                                                                       
In order to compare the threads counts, the average, the standard deviations, and variance (one - way ANOVA) were calculated for each test, and the quality between the different of threads counts was evaluated as well.                                                                                
The obtained results show that the highest values of quality coefficient were recorded for the first, fourth, and seventh designs in the first, second, and third groups respectively comparing the three groups designs. However comparing all studied designs, the highest and lowest values of quality coefficient were respectively recorded for the seventh and the third designs.                                                                                                                                   
Keywords
Dobby Loom; Bed Covers Design
Statistics
Article View: 215
PDF Download: 308