SCADA-BASED METHODOLOGY FOR CIRCUIT BREAKER MONITORING AND PROTECTION IN ELECTRICAL DISTRIBUTION NETWORKS
Dousoky, G., Ahmed, O., El-Sawy, A. (2020). SCADA-BASED METHODOLOGY FOR CIRCUIT BREAKER MONITORING AND PROTECTION IN ELECTRICAL DISTRIBUTION NETWORKS. EKB Journal Management System, 39(2), 147-155. doi: 10.21608/jaet.2020.96453
Gamal M. Dousoky; Osama K. Ahmed Ahmed; A. M. El-Sawy. "SCADA-BASED METHODOLOGY FOR CIRCUIT BREAKER MONITORING AND PROTECTION IN ELECTRICAL DISTRIBUTION NETWORKS". EKB Journal Management System, 39, 2, 2020, 147-155. doi: 10.21608/jaet.2020.96453
Dousoky, G., Ahmed, O., El-Sawy, A. (2020). 'SCADA-BASED METHODOLOGY FOR CIRCUIT BREAKER MONITORING AND PROTECTION IN ELECTRICAL DISTRIBUTION NETWORKS', EKB Journal Management System, 39(2), pp. 147-155. doi: 10.21608/jaet.2020.96453
Dousoky, G., Ahmed, O., El-Sawy, A. SCADA-BASED METHODOLOGY FOR CIRCUIT BREAKER MONITORING AND PROTECTION IN ELECTRICAL DISTRIBUTION NETWORKS. EKB Journal Management System, 2020; 39(2): 147-155. doi: 10.21608/jaet.2020.96453

SCADA-BASED METHODOLOGY FOR CIRCUIT BREAKER MONITORING AND PROTECTION IN ELECTRICAL DISTRIBUTION NETWORKS

Journal of Advanced Engineering Trends
Article 11, Volume 39, Issue 2, July 2020, Page 147-155  XML PDF (1.62 MB)
DOI: 10.21608/jaet.2020.96453
View on SCiNiTO View on SCiNiTO
Authors
Gamal M. Dousokyorcid ; Osama K. Ahmed Ahmed email ; A. M. El-Sawy
Electrical Engineering Department, Faculty of Engineering, Minia University, Minia, Egypt.
Abstract
          Supervisory Control and Data Acquisition (SCADA) systems are very necessary to keep up with the modern systems to improve and develop the electrical distribution network and manage it perfectly. The major goal of SCADA is collecting real-time data, controlling equipment and monitoring processes in critical infrastructures and most SCADA systems achieve these functions. Furthermore, in this research the benefit of SCADA system is maximized by other additive functions such as predicting the protection and maintenance procedures of the electrical network components. The circuit breaker is the most important component in the network which must be kept safe and its operation should be carefully monitored. In this paper, the problem of explosion of the expansion chambers in the circuit breaker is discussed and two solutions are suggested to handle this problem by using SCADA system. This research investigates a real existing system and the results of the study is used to enhance the maintenance and operation by monitoring the state of the circuit breaker. The possibility of leakage that may occurs during faults in SF6 gas is estimated for remaining its life time. Accordingly, the cost burdens due to fault occurrence will decrease by activating the predictive maintenance.
Keywords
Circuit breakers; SCADA; Protection scheme; HMI; RTU; SF6 and Electrical distribution networks
References
[1]          H. A. M. Abumeteir, "A Proposed SCADA System to improve the conditions of the Electricity sector in Gaza Strip," A Proposed SCADA System to improve the conditions of the Electricity sector in Gaza Strip, 2012.

[2]          S. A. Boyer, SCADA: supervisory control and data acquisition: International Society of Automation, 2009.

[3]          Y. Zhang, L. Wang, Y. Xiang, and C.-W. Ten, "Power system reliability evaluation with SCADA cybersecurity considerations," IEEE Transactions on Smart Grid, vol. 6, pp. 1707-1721, 2015.

[4]          M. B. Mollah and S. S. Islam, "Towards IEEE 802.22 based SCADA system for future distributed system," presented at the 2012 International Conference on Informatics, Electronics & Vision (ICIEV), 2012.

[5]          A. A. Sallam and O. P. Malik, Electric distribution systems: Wiley-IEEE Press, 2018.

[6]          M. S. Thomas and J. D. McDonald, Power system SCADA and smart grids: CRC press, 2015.

[7]          J. Gers, Distribution system analysis and automation: IET, 2013.

[8]          H. E. Lakervi E, Electricity distribution network design, 2nd Edition ed.: The Institution of Engineering and Technology, 1995.

[9]          J. M. Gers and E. J. Holmes, Protection of electricity distribution networks vol. 47: IET, 2005.

[10]        J. Northcote-Green and R. G. Wilson, Control and automation of electrical power distribution systems: CRC Press, 2006.

[11]        S. S. RL Chen, "The Benefits of Implementing Distribution Automation and System Monitoring  in the Open Electricity Market," presented at the Canadian Conference on Electrical and Compuler Engineering, Toronto, 2001.

[12]        R. H. McClanahan, "The benefits of networked SCADA systems utilizing IP-enabled networks," presented at the 2002 Rural Electric Power Conference. Papers Presented at the 46th Annual Conference (Cat. No. 02CH37360), Colorado Springs, CO, USA, 2002.

[13]        A. I. P. S. K. Snehal S Maskare , AISSMS IOIT; Susmita S Pendse, AISSMS IOIT; Mr. V. S. Kamble "GSM Based Plc-Scada Burner Control System," IJSRD - International Journal for Scientific Research & Development, vol. 3, pp. 930-932, 2015.

[14]        R. Radvanovsky and J. Brodsky, Handbook of SCADA/control systems security: CRC Press, 2013.

[15]        A. Bradley, "Application Guide," SCADA System. Publication AG-6.5, vol. 8, 1998.

[16]        W. T. Shaw, Cybersecurity for SCADA systems: Pennwell books, 2006.

[17]        S. Chakraborty, "Verification of security intelligence for a resilient SCADA system," 2013.

[18]        N. Ved, "Circuit breaker monitoring application using wireless communication," Texas A&M University, 2007.

[19]        M. Knezev, Z. Djekic, and M. Kezunovic, "Automated circuit breaker monitoring," presented at the 2007 IEEE Power Engineering Society General Meeting, 2007.

[20]        Q. T. Tran and Y. Besanger, "SCADA as a service approach for interoperability of micro-grid platforms," Sustainable Energy, Grids and Networks, vol. 8, pp. 26-36, 2016.

[21]        S. Li, B. Jiang, X. Wang, and L. Dong, "Research and Application of a SCADA System for a Microgrid," Technologies Journal, vol. 5, p. 12, 2017.

 

Statistics
Article View: 299
PDF Download: 1,106