INTERACTIVE COMPUTER APPLICATION FOR PREDICTING PERFORMANCE INDICATORS OF A TRACTOR-CHISEL PLOW SYSTEM IN C-SHARP ENVIRONMENT
Aboukarima, A. (2016). INTERACTIVE COMPUTER APPLICATION FOR PREDICTING PERFORMANCE INDICATORS OF A TRACTOR-CHISEL PLOW SYSTEM IN C-SHARP ENVIRONMENT. EKB Journal Management System, 33(3), 751-788. doi: 10.21608/mjae.2016.97721
Abdulwahed M. Aboukarima. "INTERACTIVE COMPUTER APPLICATION FOR PREDICTING PERFORMANCE INDICATORS OF A TRACTOR-CHISEL PLOW SYSTEM IN C-SHARP ENVIRONMENT". EKB Journal Management System, 33, 3, 2016, 751-788. doi: 10.21608/mjae.2016.97721
Aboukarima, A. (2016). 'INTERACTIVE COMPUTER APPLICATION FOR PREDICTING PERFORMANCE INDICATORS OF A TRACTOR-CHISEL PLOW SYSTEM IN C-SHARP ENVIRONMENT', EKB Journal Management System, 33(3), pp. 751-788. doi: 10.21608/mjae.2016.97721
Aboukarima, A. INTERACTIVE COMPUTER APPLICATION FOR PREDICTING PERFORMANCE INDICATORS OF A TRACTOR-CHISEL PLOW SYSTEM IN C-SHARP ENVIRONMENT. EKB Journal Management System, 2016; 33(3): 751-788. doi: 10.21608/mjae.2016.97721

INTERACTIVE COMPUTER APPLICATION FOR PREDICTING PERFORMANCE INDICATORS OF A TRACTOR-CHISEL PLOW SYSTEM IN C-SHARP ENVIRONMENT

Misr Journal of Agricultural Engineering
Article 1, Volume 33, Issue 3, July 2016, Page 751-788  XML PDF (1.28 MB)
Document Type: Original Article
DOI: 10.21608/mjae.2016.97721
View on SCiNiTO View on SCiNiTO
Author
Abdulwahed M. Aboukarima
Senior Researcher, Agricultural Engineering Research Institute, Agricultural Research Center, Egypt.
Abstract
An interactive computer application in C-Sharp language was developed to predict the performance indicator of a tractor-chisel plow system. Moreover, the purpose of such application was to aid agricultural engineers in the field of farm machinery management to select suitable inputs to make proper matching of a tractor and a chisel plow.  The required equations were formulated using the obtained weights from a trained artificial neural network model that trained using actual data field experiments. The application predicts actual field capacity (ha/h) and fuel consumption per unit area (lit/ha). Tractor loading factor was the main issue in the present application since it was used as a regulator for determination of the required draft. The application displays a chart during simulation to show the intersect point between both specific fuel consumption calculated by the application and specific fuel consumption calculated using the equation of ASABE standard. Overall energy efficiency in the range of 10–20% was acted to select the optimum values of the affecting parameters. The application outputs include theoretical field capacity, actual field capacity, field efficiency, fuel consumption per unit area, fuel consumption, energy required based on fuel consumption, draft, unit draft per unit plow width, unit draft per unit plowing area, draft power (drawbar power), energy required based on draft requirements, loafing factor, calculated specific fuel consumption, specific fuel consumption based on ASABE equation and overall energy efficiency.
For validation the developed C-Sharp application, data from previous study was utilized for chisel plow- tractor system operated in specific condition, and the simulated draft was 16.73 kN (calculated specific fuel consumption and specific fuel consumption based on ASABE equation was 0.53 lit/kWh) and the loading factor was 0.62. The relative error between actual and simulated drat was 16%. The developed application is appropriate for farm machinery management, educational and research purposes. It is user-friendly and could be run on Windows desktop without C-Sharp environment. The application could be edited and/or updated to predict performance indicators of other tractor-tillage implement systems. 
References
Abbaspour-Gilandeh, Y., M. Omid and A. Keyhani (2007). Simulation program for predicting tractor field performance. World Applied Science Journal, 2(5):552 – 558.

Aboukarima, A. M. (2007). Draft models of chisel plow based on simulation using artificial neural networks. Misr J. Ag. Eng. 24 (1):42-61.

Ahmed, S. A. H. (2011). Effect of tractor forward speed on field performance of tillage implements. Unpublished M.Sc. Thesis, Department of Agric. Engineering, Faculty of Agriculture, University of Khartoum, Sudan, 92 p. 

Akinnuli, B. O. , F. O. Akerele and A. B.C. Nathanie (2014). Model developed for farm tractors and implements selection for optimum utilization. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 5(4): 248-255. 

Al-Hamed, S., M. Wahby, A. Aboukarima and K. Ahmed (2014). Development of a computer program using visual basic for predicting performance parameters of tillage implements . Misr J. Ag. Eng., 31 (3): 1157-1190.

Al-Hamed, S.A. and A.A. Al-Janobi (2001a). A program for predicting tractor performance in visual C++. Computers and Electronics in Agriculture, 31:137-149.

Al-Hamed, S.A. and A.A. Al-Janobi (2001b). An Object-oriented program to predict tractor and machine system performance. Res. Bult., No. (106), Res. Cent. Coll. of Agri., King Saud Univ., pp. (5-24).

Al-Hamed, S.A., R.D. Grisso, F.M. Zoz and K.Von Bargen (1994). Tractor performance spreadsheet for radial tires. Computers and Electronics in Agriculture, 10:45–62.

Al-Hamed, S.A., S.A. Al-Suhaibani, F.S. Mohammad and M.F.I Wahby (2010). Development of a comprehensive computer program for predicting farm energy. Am. J. Agric. Biol. Sci., 51:89–101.

Al-Janobi, A., S. Al-Hamed and A.M. Aboukarima (2010). An excel spreadsheet to estimate performance parameters for chisel plow tractor combination based on trained an artificial neural network. Bulletin USAMV Agriculture, 67(2):1-9.
AL-Mafrachi, A.A.A. H.  (2015). Machinery Unit Energy Requirement and Fuel Consumption Tractor in Operation Tillage. International Journal of Advanced Multidisciplinary Research, 2(10):19–29.

Al-Suhaibani, S. A. and A. A. Al-Janobi (1997). Draught requirements of tillage implements operating on sandy loam soil. Journal of Agricultural Engineering Researches, 66:177-182.

Al-Suhaibani, S. A. and A. E. Ghaly (2013). Kinetic parameters of three chisel plows operating at different depths and forward speed in a sandy soil. The International Journal Of Engineering And Science (IJES),2(7):42-59.

Al-Suhaibani, S. A., M. F. Wahby, A. M. Aboukarima and I. S. Tabash (2015). Study on the effect of soil moisture content and plowing speed on draft requirements of a moldboard plow.   Journal of Advances in Agriculture, 4(3):477-486.

Al-Suhaibani, S.A. and A.E. Ghaly (2010). Performance evaluation of a heavy duty chisel plow at various tillage depth and forward speeds. American J. of Engineering and Applied Sciences, 3 (4): 588-596.

Al-Suhaibani, S.A., A.A. Al-Janobi and Y.N. Al-Majhadi (2010). Development and evaluation of tractors and tillage implements instrumentation system. Am. J. Eng. Applied Sci., 3: 363-371.

Altiniġik, A. (2012). Analysis of tractor traction performance with artificial neural networks in cultivation. Unpublished PhD Thesis, T. C. Selcuk University, Institute of Science, Turkey. (Abstract in English).
ASABE (2000). ASAE Standards D497.4 Agricultural Machinery Management Data, In: ASAE Standards 2000, (372-380) St. Joseph, MI.

ASABE (2006). American Society of Agricultural and Biological Engineers (ASABE) Standards. Agricultural Machinery Management Data. ASAE D497.5 St Joseph Michigan. pp 391-398,.

Askari, M. and S. Khalifahamzehghasem (2013). Draft force inputs for primary and secondary tillage implements in a clay loam soil. World Applied Sciences Journal, 21 (12): 1789-1794.

Askari, M., M.H. Komarizade, A.M. Nikbakht, N. Nobakht and R.F. Teimourlou (2011). A novel draft relationships for tillage and seeding three-point hitch dynamometer to measure the draft  requirement of mounted implements. Research in Agricultural Engineering, 57: 128-136.

Bashir, M.A., M.I. Dawelbeit, M.O. Eltom and H. Tanakamaru (2015). Performance of different tillage implements and their effects on sorghum and maize grown in Gezira Vertisols, Sudan. International Journal Of Scientific & Technology Research, 4(4):237-242.

Battiato, A., E. Diserens and L. Sartori (2013).Traction performance simulation for mechanical front wheel drive tractors: towards a practical computer tool. Journal of Agricultural Engineering,XLIV:(s2):e67:338-343.

Black, C.A., D.D. Evans, J.L. White, L.E. Ensminger and F.E. Clark (1965). Methods of soil analysis (part I). Amer. Soc. Agron. Inc., Madison, Wisconsin, USA: 375-377 and 552- 557.

Canakci, M., I. Unal and M. Topakci (2011). Development of computer software for determination of optimum tractor power and machinery sizes. Tarim Makinalan Bilimi Dergisi (Journal of Agricultural Machinery Science), 7(4):415-420.

Catalan, H., P. Linares and V. Mendez (2008). Tractor PT: A traction prediction software for agricultural tractors. Computers and electronics in agriculture, 6 : 289–295.

Crowell, G. and J.R. Bowers (1985). Southeastern tillage energy data and recommended reporting. Transactions of the ASAE, 28 (3):731-737.

Cuplin, C. (1976). Profitable farm mechanization, 3rd Edition, published by Crosby Lockwood Staples, London, UK.

Edwards, W. (2007). Matching tractor power and implement size. Iwo State University, File A3-26 May 2007. www.extension.iastate.edu/agdm.

El-Ashry, E.R., A.M. Bassuni, A.A. Sayedahmed and K.A. Ahmed (1994). An Instrumentation system for measuring the tractor performance: I: system development and calibration. Misr. J. of Agric. Eng. 11 (4): 952 – 971.

Eldoma, I. M. (2008). Computer programming for farm machinery power estimation. Unpublished  M.Sc. Thesis, University of Khartoum, Sudan.

Embaby, A. T. (1985). A comparison of the different mechanization systems for cereal crop production. M.SC Thesis, Faculty of Agriculture, Cairo University, Egypt.

Gee-Clough, D., M. McAllister, G. Pearson and D.W. Evernden (1978). The empirical prediction of tractor – implement field performance. J. of Terramechanics, 15(2):81-94.

Grisso, R. D., M.Yasin and M. F. Kocher (1994). Tillage implement forces operating in silty clay loam. ASAE paper No.94-1532, St. Joseph, Mich., USA.

Grisso, R.D., D.H. Vaughan and G.T. Roberson (2006). Method for fuel prediction for specific tractor models. Paper No. 061089. In: The 2006 ASABE Annual International Meeting, Portland, Oregon, USA.

Gulsoylu, E., E. Cakir, E. Aykas, H. Yalcin, B. Cakmak and A. Cay (2012). Determination of the field performances of different types of chisel legs. Bulgarian Journal of Agricultural Science, 18 (5):794-800. 

Hamod, A. I. and A. A. Essa (2010). The effect of inclination angles of disc plow and plowing speeds on some field technical indications and plowing profile gypsfreous soil conditions.  Journal of  University of Tikreet for Agricultural Sciences , 10(1):255-262. (In Arabic)

Hassan I. M., S. I. M. N. Gabir, M. A. A. Omer and O. M. Abbas       (2011). A program for predicting performance of agricultural machinery in Visual Basic. Research Journal of Agriculture and Biological Sciences, 7(1): 32-41.

Hassann, M. M. A., I. M.M. Khater and B. Yasar (2009). Effect of field size on mechanical wheat seeder performance in reclaimed lands of Egypt. Tarim Makinalan Bilimi Dergisi (Journal of Agricultural Machinery Science), 5(1):45-51.

Ishola, T. A., A. O. Ogunlela  and M. S. Abubakar (2010). An object-oriented program for matching tractors and implements. International Journal of Engineering & Technology IJET-IJENS,10(2): 1- 4.

Ismail, W. I. W. and T.H. Burkhardt (1993). Draft and fuel requirements measurement using tractor on-board data acquisition system. Pertanika J. Sci. & Techno., 1(1): 51-64.

Jafari, R., S.H Karparvarfard and S.A. Hosseini (2011). The effect of geometry and motion characteristics of narrow tillage tool on soil disturbance efficiency. Journal of Agricultural Machinery Science, 7(3):253-258.

Kaul, M., R.L. Hill and C. Walthall (2005). Artificial neural network for corn and soybean prediction, Agricultural System, 85:1-18.

Kepner, R. A., R.Bainer and E. L. Barger (1978). Principles of farm machinery. 3rd ed. The AVI Publication Company , Inc, Westport, CT.

Korayem, A.Y., M. A. Shabon and E.R. El-Ashry (1985). Field performance of a chisel plow equipped with a secondary tillage uni.t Misr. J. Agric. Eng., 2 (4): 71 – 80.

Kumar, V., Y. S. Saharawat , M. K. Gathala, A. S. Jat , S. K. Singh, N. Chaudhary and M.L. Jat (2013). Effect of different tillage and seeding methods on energy use efficiency and productivity of wheat in the Indo-Gangetic Plains . Field Crops Research, 142:1–8.

Macmillan, R.H. (2002). The Mechanic of Tractor and Tillage Implement Performance. Theory and worked examples. University of Melbourne. Obtained from: http;//www. eprints.unimelb.edu.au.

Manuwa, S.I. and M.O Ogunlami (2010). Soil-tool interaction modeling of parameters of soil profile produced by tillage tools. J. Eng. and Applied Sci. , 5:91-95.

Marchant, J.A. Marchant and C.M. Onyango (2002). Comparison of Bayesian classifier with multilayer feed-forward neural network using example of plant/weed/soil discrimination. Computers and Electronics in Agriculture, 39(1):3-22.

Mehta, C.R., K. Singh and M.M. Selvan (2011). A decision support system for selection of tractor–implement system used on Indian farms. Journal of Terramechanics, 48:65-73

Meselhy, A. A. (2014). Performance evaluation of circular chisel plow in calcareous soil. International Journal of Emerging Technology and Advanced Engineering,4 (11):1-18.

Moeenifar, A., S.R M. Seyedi and D. Kalantari (2013). Determination of traction force acting on a wide blade using dimensional analysis Method. Intl J Agri Crop Sci.,5 (13):1403-1409.  

Mohamed, A.A.I, E.R. El-Ashry, Kh. A.A. Khader and AM. F. Bahnasy (2001). Design an instrumentation system to determine the tractor performance. Misr J. of Agric. Eng., 18 (3):527 – 536.

Mohamed, H. I.,  S. I. M. N. Gabir, M. A. A. Omer and  O. M. Abbas (2011). A program for Predicting Performance of Agricultural Machinery in Visual Basic. Research Journal of Agriculture and Biological Sciences, 7(1): 32-41.

Naderloo, L., R. Alimadani, A. Akram, P. Javadikia and H. Z. Khanghah (2009). Tillage depth and forward speed effects on draft of three primary tillage implements in clay loam soil. Journal of Food, Agriculture & Environment,7 (3&4):382-385.

Ndisya, J., A. Gitau, D. Mbuge and A.Hiuhu (2016). The effect of the operational parameters on the draft requirement of ripping in a sandy clay soil. Open Journal of Optimization, 5:1-13. 

Omid, M. (2006). Introducing Simulation Software as an Educational Tool to Enhance Student Understanding of Tractor Field Performance. Int. J. Engng Ed., 22(6): 1219-1223.

PAES (2001).  Philippine Agricultural Engineering Standard (PAES 121: 2001 Agricultural Machinery – Disk Plow – Specifications, 9 p.

Park, W.-Y. and S.-S. Lee (2012). Development of a tractive performance prediction program of tractors. Journal of Biosystems Engineering, 37(3):131-139 (abstact in English).

Patel, T., A. Chakravorty and S. Karmakar (2012). Software for performance prediction and matching of tractor-implement system. Emerging Trends and Applications in Computer Science (NCETACS), 2012 3rd National Conference, DOI:10.1109/NCETACS.2012.6203271:262 – 269.

Pranav, P. K., T. Patel, M. Rathore and A. J. Sonowal (2012). Computer simulation for haulage performance of power tiller. International Journal of Computer Applications,58(5):19-25.

Ranjbarian, S.,M. Askari and J. Jannatkhah (2015). Performance of tractor and tillage implements in clay soil. Journal of the Saudi Society of Agricultural Sciences.   http://dx.doi.org/10.1016/j.jssas.2015.05.003.

Rashidi, M., I.Najjarzadeh, B.Jaberinasab, S. M. Emadi and M.Fayyazi (2013). Effect of soil moisture content, tillage depth and operation speed on draft force of moldboard plow. Middle-East Journal of Scientific Research, 16 (2): 245-249.

Sahu, R.K. and H. Raheman (2006). Draught prediction of agricultural implements using reference tillage tools in sandy clay loam soil. Biosyst. Eng., 94: 275-284.

Sahu, R.K. and H.Raheman (2008). A decision support system on matching and field performance prediction of tractor implement system. Computers and Electronics in Agriculture, 60:76-86.

Serrano Joao, M., J.O. Peca and F. Santos (2005). Draft and fuel requirement’s in tillage operations: modeling for optimizing tractor-implement systems. EFITA/WCCA joint Congress in Agriculture, VILA Real, Portugal, pp. 831–836.

Sogaard, H.T. and C.G. Sorensen (1996). A model for optimal selection of machinery sizes within the farm machinery system. Sixth International Conference on Computers in Agriculture, American Society of Agricultural Engineers, St. Joseph, Michigan, USA: 588- 596.

Srivastava, A.K. (1993). Engineering Principles of Agricultural Machines. 1st Edn., American Society of Agricultural and Biological, St. Joseph, MI., pp: 601.

Tayel, M.Y., S. M. Shaaban and H.A. Mansour (2015). Effect of plowing conditions on the tractor wheel slippage and fuel consumption in sandy soil. International Journal of ChemTech Research,8(12):151-159. 

Upadhyaya, S. K., T. H., Williams, L. J. Kemble and N. E. Collins (1984). Energy requirement for chiseling in coastal plain soils. Transactions of the ASAE, 27(6):1643-1649.

Wang, Y., F. Yang and Z. Yan (2014). Design and development of decision support system for equipping farm machines. Journal of Networks, 9(6):1648- 1655.

Younis S.M. and E.R. El-Ashry (1993). A mathematical model for predicting field capacity for agricultural machines. Alex. J. Agric. Res., 38 (2): 13-23.

Younis, S.M., E.R. El-Ashry, A.F. Bahnasy and I.M. Elsybaee (2010). Development a local system for measuring tractors performance. Misr J. Ag. Eng., 27(1): 34-53.

Yousif, L. A., M. H. Dahab and H. R. El Ramlawi (2013). Crop-machinery management system for field operations and farm machinery selection. Journal of Agricultural Biotechnology and Sustainable Development,5(5):84-90.

Zaied,  M.B., A. M. El Naim and T. E. Mahmoud (2014).Computer modeling for prediction of implement field performance variables.  World Journal of Agricultural Research,2(2):37-41.

Zaied, M. B., A. M. El Naim, A. A. Omer and M. S. Abuobieda (2016). Effect of tine depth and width on soil failure angle, cutting coefficients and power in three-dimensional case: computer modeling. World Journal of Agricultural Research, 4(1):24-30.

Zarini, R. Loghmanpour, A. Akram, R. Alimardani and R. Tabatabaekoloor (2013). Development of decision support software for matching tractor implement system used on Iranian farms. American Journal of Engineering Research (AJER), 2(7):86-98.

Zoz, F. M.  and R.D. Grisso (2003). Traction and Tractor Performance. The 2003 Agricultural Equipment Technology Conference Louisville, Kentucky, USA 9-11 February 2003.

Statistics
Article View: 286
PDF Download: 437