DEVELOPMENT OF A LOCAL ANIMAL FEED PRODUCTION LINE USING PROGRAMMING CONTROL SYSTEM | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 11, Volume 33, Issue 1, January 2016, Page 181-194 PDF (871.03 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2016.98179 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. M. Morad1; T. Z. Fouda2; A. A. K. Derbala3; A. H. EL-Metwalli3; E.A.E. Ali4 | ||||
| 1Prof. of Agric. Eng. Fac. of Agric., Zagazig Univ., Egypt. | ||||
| 2Prof. of Agric. Eng. Dept. , Fac. of Ag., Tanta. Univ., Egypt. | ||||
| 3Assoc. Prof. Agric. Eng., Fac. of Agric., Tanta Univ., Egypt. | ||||
| 4Spec of Agri. Eng. Ins. of Agric. Eng. Res, ARC. Egypt. | ||||
| Abstract | ||||
| The present study was carried out to develop programming control system of a locally made animal feed production line. The locally made feed production line consists of three units; feeding unit, milling unit and mixing unit. Performance of the local feed production line was studied under three treatments: three types of control system and three feed rates and evaluated in terms of line productivity specific energy and operational cost. The obtained results can be concluded to the following: Using of programmable control systems for controlling a local feed production line to increase productivity, save energy and cost. It is preferred to use the programmable control system with multimedia interface to control feed production line machines. | ||||
| Keywords | ||||
| Feed production line; Programmable control systems; Specific energy; operating cost | ||||
| References | ||||
|
Anon (1985). Using computers in the meat industry, Meat Process.24 (2):44.
Awady, M. N.(1978). Tractors and farm machinery. Textbook. Agric. Mech. Dept., Faculty of Agric., Ain Shams Univ.: 164-167
Bei, S.; B. Yan and W. Fang (2014). Design and realization of control system of pet feed production line. Feed Industry, (19):2.
Brown, G. (1987). Process control microcomputers in the food industry, Developments in Food preservation-4 (S. Thorne, ed.), Elsevier Appl. Sci , New York, 1987: 35.
Chang, R. F.; C. W. Chang; J.H. Chou and S. Y. Wang (2010). A HMI/GUI control in a steam-pretreated process for agriculture wastes reuses. GTI-Green Tech Int. Co. Ltd., Taipei, Taiwan: 168 – 170.
Dietrich W. and R. Kline (1984). Digital control optimizes spray dryer efficiency, Food Process;45 (3):100.
Griffin, J.M. (1990) Programmable motion control for high production applications Industry Applications Society Annual Meeting, Conference Record of the 1990 IEEE; 7-12 Oct. 1990 , 2 : 1495 - 1498
Leonik, T. (2000).Home automation basics: practical applications using visual basic .NEW YORK, NY: Delmar learning.
Linko, S. and P. Linko (1998) Developments In Monitoring and Control Of Food Processes. Trans. Chem. E, 76: Part C.
Lobe J. p. and R. J. Swientek (1984) Microcomputer process controllers increase production 30%. Food process, 45(1):90 .
Mittal, G.S. (1997). Process controls in the food industry: Problems and solutions. In Computerized Control Systems in the Food Industry, 1-11. New York, NY: Dekker Marcel Inc
Pedersen, L. D.; W. W. Rose and H. Redsun (1990) Status and needs of sensors in the food processing industry. Proceedings of food Process Automation, Am. Soc. Agric. Eng. St. Joseph. Michigan, 1990:10.
Stephanopoulos, G. (1993) Chemical Process Control, Prentice Hall, Englewood Cliffs. New Jersey, 1993: 696
Swientek, B. (1993) Placing a premium on real-time management, Prepared Foods, 162(5):74
Wang, Z.J. ; F.P. Xie and S. l. Sun, (2009) Design of performance measuring system for agricultural products processing machine Trans. of the Chinese Soc. Agric. Mach.;40 (3): 93-98
Wanghe, Z. (2013). Research and Design of Feed Production Line Control System Based on PLC. Science Mosaic, (5):30. | ||||
|
Statistics Article View: 181 PDF Download: 246 |
||||
