DEVELOPMENT AND EVALUATION OF SMALL-SCALE POWER WEEDER | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 1, Volume 31, Issue 3, July 2014, Page 703-728 PDF (1.78 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2014.98430 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| R. A. Hegazy1; I. A. Abdelmotaleb2; Z. M. Imara3; M. H. Okasha4 | ||||
| 1Assistant Professor, Agric. Eng. Dept., Faculty of Agric., Kafrelsheikh University, Egypt. | ||||
| 2Professor, Agric. Eng. Dept., Faculty of Agric., Kafrelsheikh University, Egypt. | ||||
| 3Head Researcher, Agricultural Engineering Res. Inst. Dokki, Giza, Egypt. | ||||
| 4Engineer, Rice Mechanization Research Center, Meet El- Deeba, Kafrelsheikh, Egypt. | ||||
| Abstract | ||||
| Small-scale power weeders are an important and challenging task in many countries, where the farm size in hectare per capita is very low and is declining over time. Therefore, the development of suitable mechanized weeding methods is an imperative to meet the demand for farmers. An economical mechanical power weeder that can be used as inter and intra-row weeding method was developed and evaluated in triple hybrid 314 variety of maize. Developed power weeder consisted of engine, blades assembly and transmission system. Modified vertical blades were used with the weeder and mounted on a circular rotating element on its horizontal side; the motion was transferred to blades units by amended transmission system. The effect of weeder forward speeds, depth of operation, number of blades and soil moisture content on fuel consumption, plant damage, weeding index, effective field capacity, field efficiency, energy required per unit area and total cost were studied. Three levels of soil moisture content (7.73, 12.28 and 16.18 %), two blades arrangements (two and four vertical blades for each unit), three weeder forward speeds (1.8, 2.1 and 2.4 km/h) and two depths of operation (from 0 to 20 and from 20 to 40 mm) have been chosen. The results showed that, the minimum value of fuel consumption was 0.546 l/h and recorded by using two blades with 1.8 km/h weeder forward speed at depth of operation ranged from 0-20 mm and soil moisture content 16.18 %. The highest field efficiency was 89.88% by using two blades with 1.8 km /h weeder forward speed at depth of operation ranged from 0 to 20 mm and soil moisture content 16.18%. The minimum value of effective field capacity was 0.198 fed/h by using four blades, weeder forward speed 1.8 km/h, soil moisture content 7.73% and under depth of operation ranged from 20-40 mm. The lower value of total cost was 55.09 L.E /fed and was obtained by using two blades with 2.4 km/h weeder forward speed at depth of operation ranged from 0-20 mm and soil moisture content 16.18 %. | ||||
| Keywords | ||||
| Mechanical weeding; small-scale; vertical blades; powered weeder; weeding index | ||||
| References | ||||
|
Alexandrou, A., D. Stinner, and M. Peart (2003). Evaluation of in-row weed cultivators in organic soybeans and corn. A report written for the Organic Farming Research Foundation, Santa Cruz, California.
Bin Ahmad, M. T. (2012). Development of an Automated Mechanical Intra Row Weeder for Vegetable Crops. Un-Published Thesis, Digital Repository, Graduate College, Iowa State University, USA.pp:32-38.
Cloutier, D .C. R. Y. V. D. Weide, A. Peruzzi, and M. L. Leblanc (2007). Mechanical weed management. In Non-Chemical Weed Management; principles, concepts and technology. Edited by Upadhyaya M.K and R E Blackshaw, ed.111-134. CAB International: 111-134. Available at www.Cabi.org.
Cordill, C., and T.E. Grift (2011). Design and testing of an intra-row mechanical weeding machine for corn. Biosystems engineering, V. 110, P: 247-252.
FAO (2011). http://faostat.fao.org/site/339/default.aspx.
Hemeda, M. N., and Z. E. Ismail (1992). Developing a cultivator for inter- row cotton cultivation. Misr J. Ag. Eng., 9 (4) P: 575-587.
Khurmi, R.S., J.K. Gupta (2005). Text Book of Machine Design. ; 25th edition. Chand (S.) Co. Ltd, India. Chapter 14, p: 4-7.
Manian, R., and R. Arvinda (2004) Development and evaluation weeding cum earthing up equipment for cotton. Agric Mech in Asia, Africa and Latin America 35(2) P: 21-25.
Manuwa, S.I., O.O. Odubanjo, B.O. Malumi, and S.G. Olofinkua (2009). Development and performance evaluation of a row-crop mechanical weeder. J. Eng. Appl. Sci., 4(4): 236-239.
Pannu C.J.S., A. Dixit, I.L. Garg, B. Dogra (2002). Feasibility evaluation of rotary power weeder on wider row crops like cotton, maize, sunflower, soybean etc. Annual Report, Punjab Agricultural University, Ludhiana.p: 18-26. PAU, India.
Pitoyo J., and T.M. Handaka (2000). Development of a power weeder for mechanical control of weeds in the nee field. Proceedings of the International Agricultural Engineering Conference Bangkok, Thailand. December 4-7.
Shigley, J. E., R.M. Charles, and T .H. Brown (2004). Standard handbook of machine design, 3rd edition. McGraw-Hill. New York, USA.
Singh, R. (2001). Studies on rotary weeder in wheat crop. M. Tech thesis, Punjab Agricultural University, Ludhiana, India.
Victor, M. and Ajay Verma (2003). Design and development of power operated rotary weeder for wetland paddy. Agric Mech in Asia, Africa and Latin America 34 (4): 27-29. | ||||
|
Statistics Article View: 608 PDF Download: 966 |
||||
