EKB Journal Management System
1.

EVALUATION OF THE COLOR CHANGE AND SURFACE ROUGHNESS OF REINFORCED COMPOSITE (BRILIANT CRIOS) AFTER IMMERSION IN ACIDIC BEVERAGE: AN IN-VITRO STUDY

Pages 2441-2449
shaimaa Rabee Ali; rana mahmoud sherif; Rasha nabil sami
2.

EFFECT OF COMMONLY CONSUMED BEVERAGES ON COLOR STABILITY OF HYBRID CERAMICS: AN IN VITRO STUDY

Pages 2451-2459
Mostafa H Abdelhafez; Manal R Hassan
3.

The Effect of Accuracy of All on 4 Mandibular Implant Hybrid Prosthesis Fabricated by Two Different Impression Techniques (Digital versus Conventional) on Bone Loss.

Pages 2461-2470
Amr Salaheldin Gomaa; Amr abd el bary emara; Elsayed H. Ali; Omayma Ahmad Mohamad
4.

"Effect of different Tooth Surface Finish on Marginal Adaptation of Laminate Veneers”-an In Vitro Study

Pages 2471-2476
Mohamed mahmoud Gomaa; Marwa Mohamed Wahsh; Reham Said Elbasty; Mohamed Samy Zaky
5.

ASSESSMENT OF FRACTURE RESISTANCE OF IMPLANT-SUPPORTED FIXED PARTIAL PROSTHESES CONSTRUCTED OF TWO DIFFERENT MATERIALS WITH DIFFERENT PONTIC DESIGNS

Pages 2477-2486
Mohamed Shaaban Othman; Manal Rafei Hassan Abu-Eittah
6.

Influence of Implant Inclination on Peri-Implant Bone Stress associated in Mandibular Three Implant Overdentures: A Finite Element Analysis

Pages 2487-2498
Amr A. Emarah; Nasser Zaki Ahmed; Mostafa Aldesoki; Kamal Ghamry Metwally; Amr Salah el-din Gomaa
7.

Evaluation of Biting Force between Conventional and 3D Printed Dentures ( A Crossover study)

Pages 2499-2508
Mohamed Hakim
8.

IN-VITRO RETENTION OF HIGH ARCHED MAXILLARY DENTURES CONSTRUCTED FROM CONVENTIONAL, THERMOFORMED, AND MILLED CAD/CAM RESINS.

Pages 2509-2517
abdullah Ismael Ahmed; Hussein Abdelhady Hussein Taha; Ahmed sholkamy abdelazeem; Dina Bahgat El talawy; Emad Mohamed Tolba
9.

Evaluation of antimicrobial activity and tensile strength of glass ionomer cement modified with plant extract mixture

Pages 2519-2525
Marwa Mohammed Abd eltwab; Mohammed Moustafa Shalaby; Eman Hamdy Mohammed; hanaa farouk mahmoud
10.

Influence of Different Marginal Preparation Designs on the Fracture Resistance of Vita Ambria and Vita Suprinity Endocrowns (An In Vitro Study )

Pages 2527-2536
Mohammed Zuhair Abu Nahla; Badawy Abu El Mahasen Badawy; Abdelrahman Soliman Badran
11.

Comparison of Strain Development of Implant Supported Three Units Fixed Partial Dentures Fabricated from Zirconia and PEEK “In-vitro study”

Pages 2537-2547
Mostafa hassan; Tarek Salah; Gihan Younis; talaat Mohamed Samhan
12.

Retention and Surface Roughness of Polyetherketoneketone (PEKK) Vs. Acetal Resin Framework in Kennedy Class IV Removable Partial Dentures: An In Vitro Study

Pages 2549-2557
Mohamed Abdel Hakim Abdel Aal; Iman A El-Asfahani; Tarek AbdAllah Mahmoud; Doaa Tawfik hassan
13.

The Effect of using Two Sintering Cycles on the Optical Properties of Gradient Multi-Layered Zirconia (In vitro Study)

Pages 2559-2569
Passent Hamed El Galab; Maged Zohdy; Mostafa Nour; Fatma Makkeyah
14.

EFFECT OF DIFFERENT SHADES ON THE SURFACE ROUGHNESS OF RESIN NANO-CERAMIC: IN VITRO STUDY

Pages 2571-2579
Eman Ezzat
15.

Clinical and radiographic evaluation of locator R-Tx attachments for two implants supported mandibular overdenture using two loading protocols; A randomized clinical trial.

Pages 2581-2590
Samar Mostafa Ryaad; Christine Raouf Ibrahim; Salah Abdelfattah Hegazy
16.

SURFACE ROUGHNESS AND COLOR STABILITY OF MILLED VERSUS 3D PRINTED INTERIM RESTORATION AFTER IMMERSION IN TWO PH MEDIA (IN VITRO STUDY)

Pages 2591-2604
Aya Zohdy; Marwa Beleidy; Sama Kotob; Gihan Elnaggar
17.

Retention and stability of different implant configurations of four implants supporting mandibular implant overdenture retained by telescopic attachments. In-vitro study.

Pages 2605-2614
Abdelrahman Elsaid Abdraboh
18.

COMPARATIVE STUDY OF THE RETENTION FORCE BETWEEN TWO RESILIENT ATTACHMENTS IN MANDIBULAR IMPLANT OVERDENTURE (AN INVITRO STUDY)

Pages 2615-2624
Mohamed Zaki Bassiony; Naema Ali Ammar; Khaled Mahmoud Elsherif; Sherif M. Abd Elhamid
19.

Fracture Resistance of Occlusal Veneers Fabricated from Different Types of CAD/CAM Materials: An In-Vitro Study

Pages 2625-2635
Lydia Amir Fouad; Hany Halim Nasr; Omnia Nabil
20.

Evaluation of retention values of different telescopic crown attachment materials in implant retained overdenture (an in vitro study)

Pages 2637-2644
Sherif Mohamed Abdel Hamid; Rim Adel Selima; Mohamed Zaki Basiony
21.

In Vitro Investigation of Marginal & Internal Adaptation of Two Screw-Retained Implant Supported Crowns: A Comparative Analysis of Direct Optical & Subtractive Reverse Engineering Techniques.

Pages 2645-2657
Heba Ismail; Marwa Wahsh; Ahmed Khaled Aboelfadl; Ingy Nouh
22.

Effect of Preparation Design on the Fracture Resistance of Partial Laminate Veneers. An In-vitro Study

Pages 2659-2669
Omnia Nabil; Ahmed Soliman Idris
23.

Clinical performance of fiber reinforced FRC base and bonded CAD/CAM resin composite endocrowns versus conventional lithium disilicate endocrowns in posterior teeth (Randomized Clinical Trial)

Pages 2671-2681
sherifa ahmed kandil; Sameh Sherif Abou-steit; Nancy Helmy Mickael
24.

Clinical evaluation of the biomimetic aspect in the restoration of endodontically treated teeth (Randomized clinical trial)

Pages 2683-2693
Sameh Sherif Abou-steit; Marwa Ayman Salem; Sarah Omar; Nouran Mahmoud
25.

Fracture Resistance and Failure Mode Analysis of Biomimetic Overlays Constructed from Different Machinable Blocks and Subjected to Thermo-Dynamic Aging. An In Vitro Study

Pages 2695-2705
Hanaa Sayed Nassar; Mona Essam El Din Eliwa
26.

Shear bond strength and SEM Evaluation of glass ceramics bonded to immediately sealed dentine using universal adhesive

Pages 2707-2716
Mohamed Abdelrahman Ellayeh; Nessma Sultan; Nesma Mohamed Magdy Elgohary