EKB Journal Management System
1.

Masking properties of two ceramic materials with different thickness as a Monolithic restoration

Pages 2457-2463
Mohie Elkhouly; Ahmed Thabet; Ghada Hussein
2.

Comparative laboratory investigation for the effect of thermo-mechanical stresses on mandibular denture base deformation for 3d printed and conventional dentures

Pages 2465-2477
eman mohammed; Hala Abd ElHameed
3.

Comparison between two different unilateral mandibular partial denture designs retained by extra-coronal attachment. An In-Vitro Study

Pages 2479-2485
ahmed fayyad
4.

Effect of CAD CAM and prefabricated glass fiber post adaptation on the push-out bond strength to root canal dentin

Pages 2487-2495
Abdelraheem Abdelkader
5.

Effect of different processing techniques on the marginal and internal fit of monolithic lithium disilicate and zirconia-reinforced lithium silicate restorations

Pages 2497-2507
Mazen Attia
6.

Effect of preparation depth on the fracture resistance of two monolithic ceramic laminate veneers

Pages 2509-2517
Mohamed Mohamed
7.

The Effect of Multiple Firing on the Color, Translucency, and Flexural Strength of Newly Introduced Lithium Disilicate Ceramics

Pages 2519-2529
Hoda Abdel sadek; Bassem Zaghloul; Amina Hamdy; Ahmed Thabet
8.

Effect of Repeated Heat Pressing on Fracture Resistance and Mode of Failure of Polyetheretherketone (PEEK) Three-Unit Fixed Dental Prosthesis (FDP).

Pages 2531-2542
Ahmed Arafa; Marwa Emam
9.

Influence Of Conical Versus Trilobe Implant Abutment Connection on Marginal Bone Loss, Soft Tissue Health and Prosthetic Maintenance in Mandibular Implant- Assisted Overdenture: A 3-Year Prospective Split-Mouth Randomized Clinical Trial

Pages 2543-2560
Iman El-asfahani; Mona Aboelnagga
10.

Botilinium Toxin Injection, A Potentially Effective Method For Preventing Implant Failure In Patients With Bruxism

Pages 2561-2570
Sara El Shafei; Shereen Raafat; Ayman Amin
11.

Axial and Non-axial Retention Forces of Milled Titanium Bar Versus Locator-Milled Titanium Bar Attachments in Implant-Supported Maxillary Overdenture: An In Vitro Study

Pages 2571-2584
Amina hassan; shaimaa radwan; Iman El-asfahani
12.

Influence of occlusal plane orientation on sound production and masticatory performance in implant retained mandibular overdenture

Pages 2585-2592
ENAS DARWISH; noha gamaleldin
13.

Digital Occlusal Load Analysis and Evaluation of Oral Health Quality of Life of Mandibular Complete Denture retained by Ultra Suction System

Pages 2593-2602
Shady El Naggar
14.

Evaluation of shear bond strength of resin adhesive/tooth interface after modification with grape seed extract: An in-vitro study

Pages 2603-2612
Samy El-Safty; Gehan El-Olimy
15.

The Effect of Ozonised Water versus Alkaline Peroxide Cleaners on Colour Stability, Surface Roughness and Hardness of Two Different Denture Base Materials

Pages 2613-2624
Marwa Hamada; Ahmed Alam-Eldein; Zeinab Shorbagy
16.

The Quality of Removable Partial Dentures Design for Sixth Year Dental Students at Umm Al-Qura University, Makkah, Saudi Arabia

Pages 2625-2634
Hanadi Lamfon
17.

The effect of oscillating and sonic electric toothbrushes on the wear resistance of aesthetic restorative dental materials

Pages 2635-2642
Ahmed Sayed; Wael Gamal
18.

A Stress analysis study of two different designs for unilateral distal extension base partial dentures retained by extracoronal attachment. An invitro study.

Pages 2643-2649
Nagla Nassouhy
19.

Mechanical Properties and Antifungal Activity of Ganoderma Lucidum Modified Polymethylmethacrylate: An In-vitro Study.

Pages 2651-2658
lamis Enaba; Huda El Gendi
20.

The effect of Insulin and Metformin on Prevalence and Severity of Tooth Wear in type2 Diabetic Patients.

Pages 2659-2667
Abeer Younes; Ahmed Hamam
21.

Effect of different clip materials of bar attachment on the pocket depth on Tooth- supported overdenture randomized controlled clinical study

Pages 2669-2677
May Hassan; Heba Elbelacy
22.

Effect of different implant numbers and locations on strains around implants retaining mandibular overdentures with locator attachments. An invitro strain gauge analysis

Pages 2679-2690
Mona Abo Elezz
23.

The Effect of Two Body Wear on CAD/CAM PEEK against Monolithic Zirconia, Lithium Disilicate, and Tooth Enamel; “An in vitro study”

Pages 2691-2700
Ahmed Bekhiet; Hesham Katamish; Tarek Salah; talaat Samhan
24.

Fracture resistance and failure mode of monolithic anterior crowns with two finish line thicknesses:

Pages 2701-2712
Reham Elbasty; maha taymour
25.

Comparison of adaptation accuracy between three different denture base materials for the completely edentulous upper arch. An invitro study.

Pages 2713-2719
Nagla Nassouhy
26.

Comparative wear analysis of conventional versus CAD/CAM composite veneered PEEK crowns using 3D surface deviation

Pages 2721-2731
Marwa Beleidy; Ahmed Ziada
27.

INFLUENCE OF DIFFERENT VONLAY PREPARATION DESIGNS ON FRACTURE RESISTANCE

Pages 2733-2741
Essam Sayed; shams waz; mostafa mohamed
28.

The effect of different implant location in mandibular implant assisted partial overdentures restoring Kennedy class I cases on peri-implant bone level changes and patient’s satisfaction

Pages 2743-2754
Mona Aboelnagga; mahmoud El Homossany
29.

EVALUATION OF FRACTURE RESISTANCE OF TWO LAMINATE VENEERS CERAMIC MATERIALS AT TWO LOADING ANGULATIONS (IN-VITRO STUDY)

Pages 2755-2764
Eman Mohamed; Reham Elbasty; dina elshehawi