EKB Journal Management System
1.

MICROLEAKAGE ASSESSMENT AND EFFICIENCY OF TWO ANTIMICROBIAL PIT AND FISSURE SEALANTS: AN IN-VITRO STUDY

Pages 711-719
Ines El Zayat; Mai El Banna; Doaa R . Ahmed; Amal El Zayat
2.

BONE RESPONSE TO DIFFERENT IMPLANT ABUTMENT CONNECTIONS IN IMMEDIATELY LOADED PARTIAL OVERDENTURES; A RANDOMIZED SPLIT MOUTH CLINICAL TRIAL

Pages 721-727
Ahmed Fahmy; Khaled Aziz
3.

MARGINAL BONE LOSS OF TWO IMMEDIATELY LOADED NARROW VERSUS STANDARD DIAMETER IMPLANTS RETAINING MANDIBULAR OVERDENTURES: A RANDOMIZED CONTROLLED PILOT STUDY

Pages 729-738
Iman AW Radi
4.

PREDICTABILITY OF PRIMARY IMPLANT STABILITY FROM CORTICAL BONE THICKNESS AND BONE DENSITY VALUES OF CONE BEAM COMPUTED TOMOGRAPHIC SCANS: A CROSS SECTIONAL STUDY

Pages 739-746
Iman AW Radi; Nouran Abdel-Nabi
5.

BIOMECHANICAL BEHAVIOR OF THREE SOLITARY IMPLANTS SUPPORTING MANDIBULAR OVERDENTURE: A RADIOGRAPHIC EVALUATION

Pages 747-753
Khaled Aziz
6.

VERTICAL MARGINAL GAP DISTANCE AND RETENTION OF DIFFERENT CAD/CAM CERAMIC ENDOCROWNS WITH TWO PREPARATION DESIGNS

Pages 755-767
Reham Elbasty; Adel Eltannir; Atef Shaker
7.

EFFECT OF BIOPURE MTAD, SODIUM HYPOCHLORITE AND EDTA ON DENTIN MICROHARDNESS: IN VITRO STUDY

Pages 769-774
Waleed Balubaid; Youssef Algarni; Abdulaziz Barashid
8.

SHEAR BOND STRENGTH OF VISCOUS VERSUS RESIN MODIFIED GLASS IONOMERS TO DENTIN CONDITIONED WITH DIFFERENT PROTOCOLS

Pages 775-782
Asmaa A. Yassen; Hossam A. Alhussiny; Dina S. Eldine
9.

INFLUENCE OF AXIAL WALL CONVERGENCE ON THE MARGINAL FIT OF ZIRCONIA AND LITHIUM DISILICATE COPINGS AFTER DIFFERENT SURFACE TREATMENT

Pages 783-792
Maged Mohammed Zohdy; Ahmed Abdussalam Elaradi
10.

EFFECTS OF ADDING SILVER NANOPARTICLES ON THE BONDING OF ADHESIVE SYSTEM TO CEMENT GLASS FIBER POSTS

Pages 793-798
Mohamed I. Ebrahim; Ammar Al Shamrani
11.

INFLUENCE OF 2% CHLORHEXIDINE SOLUTION ON COMPRESSIVE STRENGTH, SOLUBILITY AND CALCIUM RELEASE OF CALCIUM ENRICHED CEMENT (CEM)

Pages 799-804
Emad A. Aboalazam; Marwa E. Sharaan
12.

STRAIN GAUGE ANALYSIS OF TOOTH-IMPLANT-SUPPORTED FDP WITH NON-RIGID CONNECTORS USING DIFFERENT IMPLANT-ABUTMENT CONNECTIONS: INVITRO

Pages 805-814
Rana Sherif; Ahmed Abouel Fetouh; Lomaya Ghanem
13.

MICROLEAKAGE PATTERN AT TOOTH-ADHESIVE INTERFACE UNDER METAL-BRACKETS BONDED WITH CONVENTIONAL OR FLOWABLE NANO-ADHESIVE SYSTEMS

Pages 815-821
Rania El-Saady Badawy; Nabil El-Desouky Abou-Shamaa; Walid Shaaban Elsayed
14.

EFFECT OF REPRESSING AND GLAZING ON COLOR REPRODUCTION, TRANSLUCENCY AND SURFACE ROUGHNESS OF LITHIUM DISILICATE GLASS-CERAMICS

Pages 823-832
Amr S. El-Etreby
15.

THE EFFECT OF REPEATED HEAT-PRESSING ON THE BIAXIAL FLEXURAL STRENGTH AND SURFACE ROUGHNESS OF LITHIUM DISLILICATE GLASS-CERAMICS

Pages 833-840
Amr S. EL-Etreby; Lomaya Ghanem
16.

INFLUENCE OF POST CURING HEAT AND PRESSURE ACTIVATION FOR RESIN COMPOSITE ON IT’S SURFACE HARDNESS

Pages 841-848
Ahmed Fawzy; Ahmed Mohamed Hoseny Fayed
17.

IN VITRO MICRO SHEAR BOND STRENGTH OF DIFFERENT ADHESIVE SYSTEMS TO SOUND, CARIES AFFECTED AND SCLEROTIC DENTIN

Pages 849-857
Ashraf Elsayed Nasr; Ahmed Fawzy
18.

EFFECT OF NATURALLY DERIVED COLLAGEN CROSS-LINKERS ON DENTIN BONDING AT CLINICALLY RELEVANT EXPOSURE TIMES

Pages 859-869
Nabawy A. Alrobeigy
19.

ANTI BACTERIAL EFFECT OF DIFFERENT ADHESIVE ROOT CANAL SEALER

Pages 871-874
Medhat Taha Elfaramawy; Shady Ali Hussein
20.

THE ANTI BACTERIAL EFFECT OF DIFFERENT FORMULATIONS OF CALCIUM HYDROXIDE AGAINST E-FAECALIS

Pages 875-879
Medhat Taha Elfaramawy; Shady Ali Hussein
21.

COLOR MASKING MEASUREMENT FOR CERAMIC COATING OF TITANIUM USED IN DENTAL IMPLANTS

Pages 881-890
Khaldoun Ajlouni; Waleed Elshahawy; Raed Ajlouni; Abdelfattah Sadakah
22.

FAILURE TORQUE OF A NOVEL CERAMIC-NECK TITANIUM IMPLANT

Pages 891-898
Waleed Elshahawy; Raed Ajlouni; Khaldoun Ajlouni; Abdelfattah Sadakah
23.

CANDIDAL COLONIZATION AND PALATAL DENTURE BASE ADAPTATION IN RELATION TO DENTURE BASE MATERIALS AND THEIR PROCESSING TECHNIQUES

Pages 899-906
Hala Mohamed Abd El Hameed
24.

EVALUATION OF STRESSES AND RETENTION IN TWO DIFFERENT TYPES OF BAR ATTACHMENT USED IN IMPLANT RETAINED MAXILLARY OBTURATOR

Pages 907-917
Amr Mohamed Ismail Badr; Ahmed Gamal Ahmed Hassan
25.

ORAL REHABILITATION OF PATIENT WITH SICKLE CELL ANEMIA AND DENTAL ANOMALY: CASE REPORT

Pages 919-923
Dalia A. Abuelenain
26.

CRESTAL BONE LOSS USING DIFFERENT STUD ATTACHMENTS IN DISTAL EXTENSION CASES

Pages 925-931
Hesham I. AlmEldeen
27.

THE EFFECT OF RECIPROCAL ARM ON THE SUPPORTING STRUCTURES OF THE ABUTMENTS IN CASES RETAINED BY UNILATERAL ATTACHMENT

Pages 933-939
Hesham I. AlmEldeen
28.

ESEM ANALYSIS OF ENAMEL SURFACE MORPHOLOGY ETCHED WITH ER,CR:YSGG LASER AND PHOSPHORIC ACID: IN VITRO STUDY

Pages 941-947
Sahar Abd El Halim; Rasha Raafat; Amr ElGanzory
29.

EFFECT OF CALCIUM CHANNEL-BLOCKERS ON CLINICAL OUTCOMES OF IMPLANT RETAINED OVERDENTURE IN HYPERTENSIVE PATIENTS

Pages 949-961
Ahmed M. Alam-Eldein; Emad A. Mabrouk; amer M. Nasr Mostafa
30.

APICAL TRANSPORTATION AND CENTERING RATIO IN S-CURVED CANALS USING NITI FULL ROTATION VERSUS RECIPROCATION SHAPING TECHNIQUES

Pages 963-973
Mohammed Hamdi Atteia
31.

EFFICACY OF INCISAL PREPARATION DESIGNS ON THE FRACTURE RESISTANCE OF TWO CAD/CAM LAMINATE VENEERS

Pages 975-984
Eman Essam; Inas T Motawea; Heba E Eltayeb
32.

FRACTURE RESISTANCE OF CAD/CAM FABRICATED IMPLANT - SUPPORTED ALL - CERAMIC CROWNS CEMENTED ON READY AND CUSTOM MADE ZIRCONIA ABUTMENTS

Pages 985-1002
Hanaa I Sallam
33.

STRESS ANALYSIS OF REMOVABLE PARTIAL DENTURES OF DISTAL EXTENSION CASES FABRICATED OF TWO RECENT AESTHETIC CAD/CAM PROSTHETIC MATERIALS VERSUS CONVENTIONALLY MANUFACTURED METALLIC RPDs

Pages 1003-1017
Elsayed Gad Eid
34.

COMPARISON BETWEEN THE EFFECT OF CONVENTIONAL REMOVABLE PARTIAL DENTURES AND TELESCOPIC REMOVABLE PARTIAL DENTURES ON POCKET DEPTHS AND ALVEOLAR BONE HEIGHT OF ABUTMENT TEETH

Pages 1019-1026
Ahmed Fayyad; Nagla Nassouhy
35.

MECHANICAL PROPERTIES OF THE NEW KETAC™ UNIVERSAL GLASS IONOMER RESTORATIVE MATERIAL: EFFECT OF RESIN COATING

Pages 1027-1035
Tarek A. Soliman; Maha S. Othman
36.

EFFECT OF DIFFERENT SURFACE TREATMENTS AND RESIN TYPES ON BONDING TO TRANSLUCENT ZIRCONIA

Pages 1037-1046
Ahmed M. Hamdy; Sahar Abdel-Wahab
37.

A CLINICAL STUDY OF THE INTERNAL FIT OF ZIRCONIA AND GOLD PLATINUM CAD/CAM FRAMEWORKS FIXED DENTAL PROSTHESIS

Pages 1047-1054
Sahar Abdel Wahab; Ahmed M Hamdy
38.

INFLUENCE OF COBALT CHROMIUM FRAMEWORK FABRICATION TECHNIQUES ON MARGINAL ACCURACY AND FRACTURE BEHAVIOR OF IMPLANT-SUPPORTED METAL CERAMIC BRIDGES

Pages 1055-1068
Hanaa I. Sallam
39.

THE EFFECT OF CHITOSAN AND PROPOLIS IRRIGATION ON ROOT DENTIN MICROHARDNESS

Pages 1069-1075
Abeer Abdelhakim Elgendy
40.

CLINICAL AND RADIOGRAPHIC EVALUATION OF MAXILLARY SMALL DIAMETER IMPLANT SUPPORTED SCREW RETAINED RESTORATIONS: A TWENTY-FOUR MONTHS FOLLOW-UP

Pages 1077-1087
Heba E. Khorshid; Nora M. Sheta