EKB Journal Management System
Keywords = PMMA
Number of Articles: 28
1

Influence of Reinforcement with Silicon Dioxide Nanoparticles on The Fracture Strength and Surface Roughness of Implant-Retained Mandibular Overdenture: An In Vitro Comparative Study

Volume 70, Issue 2, April 2024, Page 1503-1513
safaa Salah Ali; Sherief M. Abdelhamid; Mostafa El_-Sayed Abd El-haleem; Iman A El-asfahani
2

Hardness and elastic modulus properties of PEEK material as an alternative to Poly Methyl Metha Acrylate (in- vitro study)

Volume 70, Issue 2, April 2024, Page 1741-1747
mohamed quassem; mamdouh mansour; wesam elsayed badr; mohamed sayed etman; belal alwakeel; faried hamam
3

Repair Bond Strength Of 3-D Printed Long-Term Provisional Material: The Effect of Surface Roughening Method and Composite Resin Material.

Volume 69, Issue 4, October 2023, Page 2989-2997
Soha Osama; Mona Galal
4

Surface roughness of implant retained mandibular acrylic overdenture treated with Titanium Dioxide Nanoparticles, An in vitro comparative study

Volume 69, Issue 4, October 2023, Page 2909-2915
Aml Atef Shafik; Reham Tharwat Kamal; Moataz Al honsainy Hassin; amr Mohamed Ismail Badr
5

ROLE OF BIODEGRADABLE ANTIBIOTICS IMPREGNATED CALCIUM SULFATE BEADS IN ERADICATION OF INFECTION IN CASE OF OSTEOMYELITIS OF LONG AND SHORT BONES IN CHILDREN AND ADULTS

Volume 4, Issue 1, July 2023, Page 25-32
Ahmed Sleem; Abdelrhman Hafez; Abdelraheem Abdelwhab; Yasser Srour
6

MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYMETHYL METHACRYLATE MATRIX REINFORCED WITH NOVEL HYBRID ORGANIC AND INORGANIC NANO-FILLERS.

Volume 20, Issue 3, July 2023, Page 40-62
A. El-Sayed M. Hassan; Eman M. Ali; M. N. El‑Sheikh; M. Nafea M. Rohim; Heba I. Elkhouly
7

The Reinforcement Effect of Nano-Zirconia on the Flexural Strength and Impact Strength of Microwaved and Heat Cured Acrylic Resin

Volume 10, Issue 1, January 2023, Page 1-10
Amal A. Eid; Mohamed A. Souhail; Heba E. Eltayeb
8

Investigation Mechanical and Biological Properties of Hybrid PMMA Composite Materials as Prosthesis Complete Denture

Volume 65, Issue 10, October 2022, Page 681-688
Nabaa S. Radhi; Noor Emad Kareem; Zainab S. Al-Khafaji; Nebras Mohammed Sahi; Mayadah W. Falah
9

Marginal Fit of PMMA CAD/CAM Crowns Fabricated by using Photogrammetry Scanning method. (an invitro study)

Volume 68, Issue 4, October 2022, Page 3537-3544
mostafa kamel; Ali elkady; lomaya Ghanem
10

A comparison of two different management techniques for extensive molar defects in patients suffering from Molar Incisor Hypomineralization (MIH) (A Randomized Clinical Trial)

Volume 27, Issue 3, September 2022, Page 10-19
Hagar Mohie; Mohamed Radwan; Amr Abd El-Aziz
11

The Effect of Ozonised Water versus Alkaline Peroxide Cleaners on Colour Stability, Surface Roughness and Hardness of Two Different Denture Base Materials

Volume 68, Issue 3, July 2022, Page 2613-2624
Marwa Hamada; Ahmed Alam-Eldein; Zeinab Shorbagy
12

INVESTIGATION OF THE ELECTROSTATIC CHARGE GENERATED FROM FABRICS SLIDING ON PMMA / HDPE COMPOSITES

Volume 19, Issue 2, April 2022, Page 12-23
A. M. Atia; W. Y. Ali; A. H. Badran
13

Effect of Different Denture Base Materials on Normal Human Fibroblast Cell Line: An In Vitro Comparative Study

Volume 68, Issue 1, January 2022, Page 733-741
Bassem Abdelhameed; Hala ahmed el kammar
14

Biocompatibility of conventional acrylic resin versus modified with titanium dioxide nanoparticles in maxillofacial prosthesis. A parallel randomized control trial

Volume 68, Issue 1, January 2022, Page 807-815
Noha Aligamaleldin; Nancy Elsherbini
15

Evaluation of fracture resistance and color stability of innovative esthetic crowns for primary posterior molars

Volume 67, Issue 3, July 2021, Page 1879-1886
sherine youness badr; Mohammad Rayyan; manal elshiekh
16

TRIBOLOGICAL BEHAVIOUR OF STEEL LUBRICATED BY GREASE FILLED BY POLYMERIC ADDITIVES

Volume 18, Issue 3, July 2021, Page 11-12
M. Bakry; A. M. Samy; A. Nabhan; A. Rashed
17

Fabrication of Novel (PMMA-Al2O3/Ag) Nanocomposites and its Structural and Optical Properties for Lightweight and Low Cost Electronics Applications

Volume 64, Issue 1, January 2021, Page 359-374
Angham Hazim; Ahmed Hashim; Hayder Abduljalil
18

Microleakage of Temporary Crowns with Different Cement gap

Volume 24, Issue 1, January 2021, Page 27-31
Ahmed Yousef Elbieh; Hesham Ibrahim Othman; Khaled Mohamed Haggag
19

Effect of Incorporation of Lanthanum and Cerium-doped Hydroxyapatite on Acrylic Bone Cement Produced from Phosphogypsum Waste

Volume 63, Issue 5, May 2020, Page 1823-1832
Tamer M. Hamdy; Sahar M.A. Mousa; Marwa A. Sherief
20

Preparation and Characterization of Novel Poly(MMA-co-GMA)/Ag Nanocomposites for Biomedical Applications

Volume 62, Issue 12, December 2019, Page 2245-2252
Dalia Hanaa; Ahmed Youssef; Eman El-Metwally; Magdy Abdelaal
21

Optical and electrical properties of plasma surface treated polymethylmethacrylate films

Volume 52, Issue 4, October 2019, Page 83-92
Naglaa Mohammed El-Sayed; omar farag farag
22

Incorporating nano graphene oxide to poly-methyl methacrylate; antibacterial effect and thermal expansion.

Volume 1, Issue 1, July 2019, Page 19-23
Reem Gamal; Yasser F. Gomaa; Ashraf M. Said
23

Shear Bond Strength of different resin-based materials Processed on Poly-ether-ether ketone frameworks (IN VITRO STUDY)

Volume 44, Issue 1, April 2019, Page 93-98
Mohamed A. Eltombakshy; Mohamed S. Elattar; Dawlat M. Ahmed
24

LABORATORY EVALUATION OF PRE-POLYMERIZED DENTURE BASE MATERIAL USED FOR CAD/CAM COMPLETE DENTURE MANUFACTURING

Volume 43, Issue 3, December 2018, Page 94-101
Yusra M. Saad; Ahmed M. Abdelhamid; Sonia M. ElShabrawy
25

EFFECT OF SUPERSTRUCTURE MATERIAL ON PINK ESTHETICS & MARGINAL BONE LOSS AROUND IMMEDIATE LOADING IMPLANT: A RANDOMIZED CONTROLLED TRIAL WITH 1 YEAR FOLLOW-UP

Volume 64, Issue 2 - April (Fixed Prosthodontics, Dental Materials, Conservative Dentistry & Endodontics), April 2018, Page 1903-1913
Aliaa Mahrous; Mohamed M Radwan; Inass Aboulmagd
First Page Previous Page 1 2 Next Page Last Page