EKB Journal Management System
1.

Wear, Microhardness and Fracture Toughness of Different CAD/CAM Ceramics

Pages 485-495
Rasha Sayed Asaad; Shereen Salem
2.

Effect of Artificially Accelerated Ageing and Different Mouth Rinses on Color Stability of Veneered PEEK Crowns

Pages 497-507
Ahmed Ziada; Marwa Beleidy
3.

Shear Bond Strength of Aged Monolithic Zirconia Veneers Using Different Types of Bonding agent

Pages 509-518
Ghada Hussein; Tarek Morsi; Dina Afifi
4.

Development and Implementation of Evidence-based Dentistry Teaching Module at Saudi Arabian University

Pages 519-530
Mohammed Zahran; Dania A. Sabbahi
5.

Potential Toxicity Evaluation for a Nano-modified Veneering Ceramic System. Experimental Study in Dogs

Pages 531-536
Radwa Eldessouky; Khaled Ali
6.

biological and mechanical effect of different types of attachments on supporting structures in implant retained mandibular overdenture a Randomized clinical study

Pages 537-546
Ahmed Shaaban; Mahmoud M.Ammar; bassem abdelhamed
7.

Marginal Adaptation, Compressive Strength, Water Sorption, Solubility and Ion Release of a Claimed Bioactive Restorative Material

Pages 547-561
Mohamed Kandil; Dalia Sherief
8.

Shade Matching of CAD/CAM Lithium Silicate Ceramics Veneered on Newly Introduced Foundation Material.

Pages 563-570
Nahla Elhelbawy
9.

Evaluation of masticatory muscle activity and survival rate of single implant-retained mandibular overdenture fabricated from thermoplastic versus conventional acrylic resin. A randomized controlled trial

Pages 571-581
Wafaa Ibrahim; Dina Elawady
10.

Comparison of the Internal fit of conventional casting versus CAD wax (In-vitro Study)

Pages 583-587
Fatema Mansour
11.

The Effect of Laser Grooved Implant Retained Overdenture on Bone Height Changes

Pages 589-596
Sonal Abdel Baseer; Hussein Elcharkawi; Mohamed Mahmoud Dohiem
12.

Influence of Conventional Versus Digital Workflow on Marginal Fit and Fracture Resistance of Different Pressable Occlusal Veneers After Thermomechanical Fatigue Loading

Pages 597-613
Shereen Elsayed; Reham Elbasty
13.

COMPARISON BETWEEN THE EFFECTS OF THE PLATELET RICH FIBRIN (PRF) VERSUS XENOGRAFT ON PRIMARY STABILITY IN MANDIBULAR PREMOLARS IMMEDIATE IMPLANTS

Pages 615-623
Ahmed Rageh; Ahmed Mohamed Fahmy; Nada Sherin El Khourazaty
14.

THE EFFECT OF PLATELET RICH FIBRIN ( PRF) VERSUS XENOGRAFT IN CLOSED SINUS LIFT WITH IMPLANT PLACEMENT ON IMPLANT STABILITY IN MAXILLARY POSTERIOR AREA Randomized Clinical Trial

Pages 625-634
Mahmoud Adel Shaaban; Ahmed Mohamed Fahmy; Nada sherin
15.

Clinical evaluation of monolithic Zirconia (5Y), Lithium Disilicate and modified PEEK CAD-CAM endocrown materials,3-year clinical prospective study

Pages 635-650
raafat tammam
16.

Comparative Study of Silicone-based Soft Liner Versus Versacryl Liner for Mandibular Complete Denture Cases (Randomized Clinical Trial)

Pages 651-660
Mennatallah Shalabi; Essam Aziz; Naglaa Nassouhy; Nermine Amin
17.

Comparative laboratory evaluation of dimensional accuracy for 3D-printed complete maxillary denture

Pages 661-668
Hala Abd ElHameed; Sara Mohamed
18.

EFFECTS OF THE PLATELET-RICH FIBRIN (PRF) ON BONE DENSITY IN IMMEDIATE IMPLANT PLACEMENT AND LOADING IN ESTHETIC ZONE (A randomized Clinical Trial)

Pages 669-677
Ahmed Adel Shaaban Metwally; Ahmed Mohamed Fahmy; Nada Sherin El Khourazaty
19.

Evaluation of Color Change of Heat Cured Denture Base Material Incorporated with Novel Silver Nanoparticles Submitted to Accelerated Aging

Pages 679-688
Hamada Atia
20.

Stress analysis of two different attachments for a single implant retained mandibular overdentures in the midline (In vitro study)

Pages 689-697
ahmed hasanin; hamdi abo alfotouh; Nouran Abdel Nabi
21.

Electromyographic evaluation of the masseter and temporalis muscles activity in patients with complete denture, implant supported and implant retained mandibular overdentures. a cross-over study

Pages 699-709
shahinaz mohamed
22.

Effect of Simulated Gastric Acid on Surface Roughness of Different Types of Dental Ceramics

Pages 711-716
moaz eltorky; mahmoud shakal; waleed elshahawy; El-Refaie Kenawy
23.

Biological and prosthetic complications of cantilevered and non-cantilevered fixed hybrid metal acrylic prostheses used for vertical and inclined implants in atrophied mandible. A randomized clinical trial.

Pages 717-728
Ahmed Samir Khairallah; Mohammed Omran Hamed
24.

Effect of Preheating Cycles on Microshear Bond Strength of Nanohybrid Resin Composite Luted to CAD/CAM Ceramic

Pages 729-738
Mostafa Aboushahba; Ahmed Korayem; Sara Hany Younis
25.

Peri-implant strain with locator and bar attachment during dislodging of maxillary implant overdenture. A comparative invitro study

Pages 739-746
shahinaz mohamed; Mohamad Helmy
26.

Peel bond strength between a silicone-based soft liner and a heat-cured acrylic resin denture base reinforced with three concentrations of metal oxide nanoparticles

Pages 747-755
Mohamed shawkey najjar; Osama Baraka; Ahmad Shoeib
27.

Evaluation of Surface Micro-hardness and Fracture Toughness of Conventionally Constructed versus CAD/CAM Constructed Denture Base Materials- an In-Vitro Study.

Pages 757-765
maha kamal
28.

Microtensile bond strength of zirconia nanofillers reinforced acrylic resin to denture teeth after thermocycling

Pages 767-774
kawkb Mohamed Eltamimi; Dalia Abdel-Moniem Bayoumi
29.

DENTURE BIOFILM AND DENTUREASSOCIATED STOMATITIS, A LITERATURE REVIEW

Pages 775-787
Hanadi Ahmed Lamfon