EKB Journal Management System
1.

PIEZOELECTRIC REPEATED SCALING EFFECT ON MARGINAL LEAKAGE OF TWO DIFFERENT CEMENTED CERAMIC CROWNS

Pages 3411-3420
Magdy Mandour; Mohammed Shalaby; Reem Gamal
2.

Comparing changes of retention between milled zirconia and Polyetheretherketon (PEEK) framework on telescopic implant retained overdenture: An invitro study

Pages 3421-3430
Nora sheta; Nouran Abdel Nabi
3.

Digital evaluation of a simplified technique for resin splinting used for multiunit implant restoration impressions: An in-vitro comparative study

Pages 3431-3441
Sherif El-Dakkak; Akram Fathy Neena
4.

VERTICAL MARGINAL GAP ASSESSMENT OF CAD ON VENEERED PEKK CROWNS VERSUS CAD ON VENEERED ZIRCONIA CROWNS (A Randomized in vitro study)

Pages 3443-3454
Nada Fahmy; Hesham Katamish; Reham Elbasty; Mohamed Abbas
5.

COMPARISON OF THE FRACTURE RESISTANCE BETWEEN INLAY RETAINED FIXED PARTIAL DENTURES FABRICATED FROM MILLED PEEK (BIOHPP) AND MONOLITHIC ZIRCONIA (In vitro study)

Pages 3455-3465
Hesham Mostafa; noha El-khodary; Rasha sami
6.

Evaluating The Stresses Induced by Pekkton® and Zirconia Primary Coping on The Supporting Structures of Mandibular Telescopic Partial Denture (An in vitro study)

Pages 3467-3473
shima mohamed; NORA sheta
7.

Evaluation of Denture Adhesive versus Single Implant on Complete Denture Retention and Patient Satisfaction

Pages 3475-3486
Ahmed Alam-Eldein
8.

Evaluation of margin and internal fit of full arch metal coping fabricated using computer aided milling, direct laser sintering, and traditional casting technique

Pages 3487-3494
Ehab A. Farghaly; Mohammad Rayyan
9.

EVALUATION OF FRACTURE RESISTANCE OF 3D-PRINTED IMPLANT RETAINED OVERDENTURE WITH TWO DIFFERENT BUILD ANGLES. (AN IN-VITRO STUDY )

Pages 3495-3502
Mona Awajah; Nadia Abbas; Reham Osman
10.

The effect of Titanium dioxide nanoparticles incorporation in overdenture on the preservation of the gingival health of the abutment

Pages 3503-3509
Noha Aligamaleldin; Hany Mohamed Khattab
11.

Patients’ satisfaction and quality of life with complete dentures constructed by various clinicians. A cross-sectional study.

Pages 3511-3517
Seham Mohamed
12.

Effect of staining solutions on color and translucency change of different monolithic CAD-CAM ceramic materials

Pages 3519-3530
Ahmed Arafa; Mazen Attia
13.

Effect of different partial denture designs in mandibular distal extension cases on bacterial growth (A Randomized Clinical Trial)

Pages 3531-3536
ENAS DARWISH
14.

Marginal Fit of PMMA CAD/CAM Crowns Fabricated by using Photogrammetry Scanning method. (an invitro study)

Pages 3537-3544
mostafa kamel; Ali elkady; lomaya Ghanem
15.

Prevalence and pattern of partial edentulism among Egyptian patients. An observational cross-sectional study.

Pages 3545-3551
Mohamed Sharaf; ahmed Elhagali; ahmed Elbakery
16.

Effect of different ceramic materials on debonding time with dentin using Er, Cr:YSGG laser

Pages 3553-3558
Ahmed Abdelkhalek; Marwa Wahsh; Hoda Abdel sadek
17.

Fracture resistance of different zirconium dioxide three-unit fixed dental prostheses

Pages 3559-3564
Abeer Atout
18.

Two-Body Wear and Surface Roughness of CAD/CAM Esthetic Monolithic Block Materials using Chewing Simulation against Enamel Antagonists

Pages 3565-3578
Hadil Sabry; Nehal Abouraya
19.

Comparative study of candida albicans adherence to conventional acrylic denture base materials and injection molding acrylic materials and poly ether ether ketone

Pages 3579-3585
reham sharabasy; Mai Esam Ahmed; ebtehal Mohammed
20.

Fracture resistance of endodontically treated premolars restored with lithium disilicate crowns retained with fiber posts compared to lithium disilicate and PEEK endocrowns (An in vitro study)

Pages 3587-3607
Sherif Leon; Iman Salah; Carl Halim
21.

Direct pick-up versus indirect pick-up technique for 4- implants retained single maxillary overdentures with bar attachment: Clinical evaluation.

Pages 3609-3618
ENAS DARWISH; mai helmy
22.

DIGITAL OCCLUSAL ANALYSIS, PATIENT SATISFACTION AND PROSTHODONTIC MAINTENANCE OF MINI-IMPLANT VERSUS STANDARD DIAMETER IMPLANT OVERDENTURES: A TWO-YEAR FOLLOW-UP STUDY

Pages 3619-3635
Yasser Shawky; Hana Youssef
23.

Effect of different lithium silicate ceramics with variable shades, thickness and curing modes on the degree of conversion of resin cement

Pages 3637-3645
nermeen nagi
24.

Effect of Different Shading Techniques on Color, Translucency and Flexural Strength of Zirconia Ceramic after Aging

Pages 3647-3658
Mohamed Gamal Elbadry; Cherif Mohsen; Raessa Hashem
25.

Influence Of Different Implant Abutment Connection On Fatigue Life Of Bone In Edentulous Hemimandibulectomy Cases Restored By Implant Supported Overdenture. A Finite Element Analysis

Pages 3659-3669
Reem Eldien Gamal; Amr Mohamed Ismail Badr; Emad Mohammed Agamy
26.

EVALUATION OF THE INTERNAL FIT OF PRESSABLE VERSUS CAD/CAM PEEK POST AND CORE USING SCANNING ELECTRON MICROSCOPE: AN IN VITRO STUDY

Pages 3671-3682
Shaimaa Naddar; Iman Hamdy; Maha Taymour
27.

REPERCUSSION OF 2 DESIGNS OF LINGUALIZED OCCLUSAL SCHEMES ON EMG ACTIVITY MUSCLES IN MANDIBULAR IMPLANT SUPPORTED OVERDENTURE RANDOMIZED CONTROLLED CLINICAL STUDY

Pages 3683-3690
Nancy EL Sherbini; mai helmy
28.

Post-gel shrinkage strain and degree of conversion of nanohybrid resin composite containing graphene oxide nanoparticles

Pages 3691-3699
Wael Mohamed Gamal; Ahmed Magdy Sayed
29.

Can Omnichroma revoke other restorative composites? Mechanical and physical assessment of Omnichroma dental resin restorative composite: An In- vitro study.

Pages 3701-3716
Dina El- Refai
30.

Radiographic evaluation of crestal bone loss around one- piece versus two-piece implant with bar retaining mandibular overdenture. (A Randomized clinical trial)

Pages 3717-3724
amr Badr; Mohamed Zaki
31.

Effect of intra-chamber extension of lithium disilicate endocrowns on the fracture resistance and failure modes in endodontically treated molars (In-Vitro study)

Pages 3725-3732
Nader EL Mankabady; Atef Ibrahim; Carl Halim
32.

The effect of incorporating graphene oxide nanoparticles within self-etch adhesive on the antibacterial properties and shear bond strength

Pages 3733-3740
Wael Gamal; Shaimaa Ahmed Alrafee; Ahmed Sayed
33.

Clinical, Radiographic, and Prosthetic Outcomes of Poly Ether Ether Ketone (PEEK) Versus Poly Ether Ketone Ketone (PEKK) Frameworks in Mandibular Fixed-Detachable Implant-Supported Prosthesis: A Randomized Clinical Trial

Pages 3741-3759
Iman El-asfahani; amr Badr
34.

Color Stability of three esthetic monolithic block materials after immersion in commonly consumed beverages

Pages 3761-3770
Nehal Lotfy Abouraya; Hadil Sabry
35.

Evaluation of metal base adaptation and clinical retention of upper complete dentures with a CO-CR metal palate constructed by two different approaches.

Pages 3771-3782
eman mohammed; enas elddamony; Sara Mohamed
36.

The impact of application mode of three universal adhesives with different chemical compositions and curing techniques on their micro shear bond strength to dentin

Pages 3783-3791
Mohamed Kamel; Mennatallah Mehena; Zainab Soliman
37.

Internal fit and marginal adaptation of CAD/CAM lithium disilicate endocrowns fabricated with conventional impression and digital scanning protocols. An in-vitro study

Pages 3793-3808
Hanaa Nassar
38.

STRAINS INDUCED BY ZIRCONIA AND METAL RESIN BONDED ATTACHMENTS VERSUS EXTRACORONAL ATTACHMENT WITH FULL VENEER RETAINER IN MAXILLARY DISTAL EXTENSION REMOVABLE PARTIAL DENTURES

Pages 3809-3822
Rehab Al Aswad; Hanaa G. Youssef
39.

Periodontal Health and Marginal Bone Height Change around Abutments in Zirconia versus Cobalt-Chromium Bar Retained Mandibular Tooth Supported Overdenture: A Randomized Controlled Clinical Trial

Pages 3823-3834
Iman El-asfahani; Rehab Al Aswad
40.

ACCURACY OF CONVENTIONAL AND DIGITAL IMPRESSIONS AT DIFFERENT SPAN LENGTHS OF MISSING TEETH (COMPARITIVE IN-VITRO STUDY)

Pages 3835-3848
Nada El-Sheikh; Rana Sherif; Mostafa Kamel
41.

A CBCT evaluation of marginal bone loss in two vs. four Implants-bar supported mandibular overdenture: Randomized Clinical Trials

Pages 3849-3856
Ramy Ali; Inass AbuElmagd; Amr Gomaa