EKB Journal Management System

1.

Color stability of ceramic occlusal veneer with different translucency, designs and resin cement curing modes using “accelerated Artificial Aging”

Pages 367-374
Adel A. El Badawy; Mohammed H. Abd El Aziz; Elsayed A. Omar

2.

Fracture Resistance of Endodontically Treated premolar Teeth Restored With CAD/CAM Lithium Disilicate Endocrowns and H-shaped post: In Vitro Study

Pages 375-380
Alaa Abdelzaher Abdelhamid Omara

3.

Comparative Study of Cyclic Fatigue Resistance of Protaper Gold, OneShape, and TF Files

Pages 381-385
Shady Ali Hussein; Amr Ahmed Bayoumi

4.

IN VITRO EVALUATION OF THE Effect of different irrigation solutions on the apical sealing ability of three root canal sealers when the continuous wave obturation technique was used

Pages 387-397
Mohamed AM. El Sayed; Shakeri M. Fathieh

5.

Fluoride Release and Recharge Behavior of Bioactive Glass Ionomer Cements using Ion Chromatography

Pages 399-406
Asmaa Mohamed Abdallah; Tamer Mohamed Elshehawy; Hamada Mohamed Ibrahim

6.

Microhardness testing of resin cement versus sonic bulk fill resin composite material for cementation of CAD/CAM composite block with different thickness

Pages 407-416
Ahmed Elzoheiry; Amir Hafez; Haitham Amr

7.

Effect of Acidic Drinks on Color Stability of Different Direct Bulk-Fill Resin Composite Restorations

Pages 417-426
Nadia M. Zaghloul; Ashraf I. Ali

8.

Does a Low-shrink Resin Composite Induce Less Stress at the Adhesive/Dentin Interface in High C-factor Cavities?

Pages 427-438
Nadia M. Zaghloul

9.

Effect of Root Canal Geometry Versus Different Coronal Restorations on the Strength of Endodontically Treated Teeth

Pages 439-443
Shady Ali Hussein; Ahmed A. Laithy

10.

Effect of different fixed detachable implant supported prosthesis materials on the stresses induced on the supporting structures

Pages 445-452
M. Shady Nabhan

11.

EFFECT OF AGING ON THE SHEAR BOND STRENGTH OF ZIRCONIA CERAMIC WITH DIFFERENT SURFACE TREATMENTS

Pages 453-461
Shams Waaz Amgad Ali; Shereen Kotb Salem

12.

Evaluation of Naturally Derived Hydroxyapatite Tissue Engineering Scaffold Coated With Chitosan-Carbon Nanotubes Composite

Pages 463-474
Salma M. Fathy; Tarek A. Elkhooly; Ahmed A. Emam; Fikry M. Reicha

13.

Effect of post-etching cleaning methods on surface micromorphology and shear bond strength of composite resin cement to feldspathic ceramic blocks

Pages 475-482
Ahmed Ziada; Dobbo Csaba

14.

Bite Force and Bone Height Changes around Abutments Retaining Mandibular Removable Partial Denture with Wrought Wire and Polyamide Clasps: Split Mouth Study

Pages 483-491
Ahmed Khalifa Khalifa; Nesreen Elmekawy

15.

Effect of different methods of vital tooth bleaching on the resistance of enamel to erosion using Energy–Dispersive X-Ray Spectrometry analysis

Pages 493-511
Reham Mohammed Attia; Eman Mohamed Sobhy Elbahrawy; Mona Elsaied Abd El Hamed Essa

16.

The Surface Gloss and Micro-hardness of Two Recent Tooth Colored Restorative Materials After In-office Bleaching

Pages 513-521
Hebatallah M. Taher; Eman A. Abouauf

17.

Effect of different beverages on microhardness of Zirconia reinforced Glass Ionomer and micro-hybrid Resin composite

Pages 523-530
Heba Bahgat; Hadeel Farouk

18.

Five-year Radiographic Changes of Residual Ridges under Maxillary Complete Denture and its Opposing Mandibular Two Implant-Retained Overdenture with Different Resilient Attachments

Pages 531-540
Radwa M. K. Emera; Elsayed A. Abdel-Khalek

19.

Effect of Matrix Metalloproteinase Inhibitor from Mulberry fruit extract on the Microtensile Bond Strength Stability: An in vitro Study

Pages 541-550
Rania Mosallam; Nermin Younis; Hadeel Farouk; Osama Mosallam

20.

Repair potentiality of CAD/CAM composite block and hybrid ceramic block by direct resin composite restoration with and without surface treatment

Pages 551-562
Ahmed El Zohairy; Amir Hafez; Haitham Amr

21.

MICROBIOLOGICAL AND IMMUNOLOGICAL EFFECTS OF MONOMER FREE THERMOSENS AND NANO ZIRCONIA OXIDE REINFORCED DENTURE BASE RESINS ON CONTROLLED DIABETIC DENTURE WEARERS

Pages 563-577
Amira M. Gomaa; Hanadi A. Lamfon; Yahia A. Maher

22.

The effect of number of telescopic PEEK crowns on unilateral free-end saddle supporting structures. A strain gauge stress analysis study

Pages 579-586
Sahar A. Ghorab; Doaa A. Rostom

23.

THE EFFECT OF TWO DIFFERENT ANTIOXIDANTS ON THE SHEAR BOND STRENGTH OF RESIN BONDED GLASS CERAMICS TO BLEACHED ENAMEL

Pages 587-598
Mohamed Mohey Eldin Mohamed

24.

Fracture resistance of different esthetic partial coverage restorations

Pages 599-609
Shaimaa Ahmed Abo El-Farag; Mohammed Samir El Nawawy

25.

Oral health related quality of life in hemimaxillectomy patients rehabilitated with obturator prosthesis fabricated using different materials

Pages 611-618
Mostafa I Fayad; Ihab M Atito; Mahmoud Ammar

26.

EVALUATION OF MECHANICAL PROPERTIES OF EXPIRED AND NON-EXPIRED RESIN COMPOSITE. A COMPARATIVE STUDY

Pages 619-628
Ahmed Adel A. Aziz

27.

Effect of Vented and Closed Abutments on Peri-Implant Soft and Hard Tissues - Clinical and Radiographic Assessment

Pages 629-639
Maged Mohammed Zohdy; Waleed Mohamed Abbas

28.

Effect of Different Surface Treatment Modalities on Surface Roughness and Shear Bond Strength of Orthodontic Molar Tubes to Lithium Disilicate Ceramics

Pages 641-656
Rania E Bayoumi; Sara M. El-Kabbany; Nevin Gad

29.

Effect of different finishing and polishing systems on surface roughness and color changes of resin composites: An in vitro study

Pages 657-666
Ola Barakat; Muhammad Abbas

30.

Assessment of resin -ceramic bond strength under various pH conditions for different ceramic materials subjected to two surface treatment protocols

Pages 667-679
Reham Elbasty; Maha Taymour

31.

Evaluation of one-visit apexification with MTA apical plug versus traditional Calcium hydroxide apexification with the help of Platelet Rich Fibrin apical matrix

Pages 681-690
Mohammed E Rokaya; Elsaeed Abdel Hafiz

32.

Influence of two different implant designs on implant stability

Pages 691-699
Maha Nagi

33.

Comparative Study of the Antibacterial effect of MTA, Nano-MTA, Portland cement, AND Nano-Portland cement

Pages 701-706
Yousra M. Nashaat; Ahmed H. Labib; Nada Omar; Mostafa shaker; Neveen A. Helmy

34.

EVALUATION AND COMPARISON OF THE INFLUENCE OF MICROWAVE AS A DISINFECTANT METHOD ON THE COLOUR STABILITY, MECHANICAL AND PHYSICAL PROPERTIES OF THERMOPLASTIC (BREFLEX) AND ACRYLIC RESINS DENTURE BASE MATERIAL

Pages 707-724
Iman M.S. Matar; Ahlam M. El-Sharkawy

35.

The effect of framework material on partial overdenture supporting structures

Pages 725-729
Sara Fikry El Shafei

36.

The effect of negative pressure on the antibacterial effect of herbal irrigant (An in vitro study)

Pages 731-737
ElSaeed Abdel Hafiz; Adel Abdelwahed

37.

Color stability of Vita classical shade guide after artificial accelerated aging

Pages 739-746
Mazen Attia; Lomaya Ghanem; Tamer Hamza

38.

Effect of Wet and Dry Finishing and Polishing on Surface Roughness and Miarohardness of Bulkfill Resin Composites

Pages 747-754
Rasha Hassan Ali Afifi; Sara Mohamed Hany Aly

39.

The Effect of Different Post Space Surface Treatments on Push-out Bond Strength of Fiber Posts Adhesively Bonded to Root Canal Dentin

Pages 755-761
Mostafa ElSayed AbouShahba

40.

Fracture load of all-ceramic crowns after two different conditioning techniques

Pages 763-770
Shaimaa Ahmed Abo El-Farag Ibraheim

41.

Prevalence of Failed Inferior Alveolar Nerve Block (IANB) in Achieving Pulpal Anaesthesia in Mandibular Molars with Symptomatic Irreversible Pulpitis

Pages 771-776
Mohammed Howait; Ghadeer I. Basunbul

42.

Stress distribution around titanium-zirconium narrow-diameter implants retaining mandibular over dentures with Novaloc versus locator attachment systems. A three-dimensional finite element analysis

Pages 777-785
Eatemad R. Taha

43.

Evaluation of Antibacterial Effect of a new root canal irrigating Formula of Salvadora persica Roots Nanoparticles. An In vitro Study

Pages 787-792
Moatazbellah A. Alkhawas; Rehab Abdelmonem; Mohammed E Rokaya

44.

Peri-Implant Bone Loss and Esthetic Outcome of Single-Tooth Implant in Patients with Type 2 Diabetes

Pages 793-802
Walid Al-Zordk; Sally Awad; Samah Saker

45.

Effect of Preparation Design on Fracture Resistance and Failure Mode of Root Canal Treated Maxillary Premolars Restored with Onlay Restorations

Pages 803-811
Walid Al-Zordk

46.

EFFECT OF NANOPARTICLES MODIFIED GLASS IONOMER CEMENT ON THE COLOUR AND SHEAR BOND STRENGTH OF LITHIUM DISILICATE CERAMIC

Pages 813-824
Shereen Kotb Salem; Rasha Sayed Asaad

47.

Comparative Evaluation of the Antibacterial Effect of Triple Antibiotic Paste Versus Propolis as Intracanal Medicament

Pages 825-830
Elsaeed Abdel Hafez; Amgad H . Soliman

48.

ANTIBACTERIAL EFFECT OF SALVADORA PERSICA ROOTS NANOPARTICLES VERSUS SODIUM HYPOCHLORITE AS ROOT CANAL IRRIGATION

Pages 831-836
Elsaeed Abdel Hafez; Amgad H . Soliman

49.

Effect of Artificial Saliva, Bioactive Glass and Fluoride Varnish on Micro-hardness and Micro -shear Bond Strength of Demineralized Enamel Surface

Pages 837-847
Hebatallah M. Taher; Mohamed Fouad Haridy