EKB Journal Management System
1.

Accuracy of Intraoral Scanning of Implant Level Impression Technique Versus Abutment Level Impression In Implant Mandibular Supported Overdenture. In-Vitro Study

Pages 353-361
Doaa Mahmoud Elkady; Nesma Awaad
2.

Radiographic and clinical assessments of CAD\CAM titanium and BioHPP framework in maxillary fixed implant-supported prosthesis

Pages 363-376
lamiaa farouk zaki; Hanan Mohsen Al-Asad; Hebatallah Tarek Abdallah
3.

A Comparative Study of Different CAD/CAM Materials Reinforcing Implant Retained Overdenture Base Material (An In vitro Study)

Pages 377-385
May Mahmoud Hassan; Heba Refaat Elsarrif
4.

Flexural strength OF MILLED PEEK BAR VERSUS PEKK BAR ON TOOTH SUPPORTED OVERDENTURES. IN VITRO STUDY

Pages 387-394
Nesma Awaad
5.

Evaluation of Marginal Accuracy & Fracture Resistance of Different CAD/CAM Fabricated Monolithic Vonlays

Pages 395-402
Rasha Sayed Asaad; shereen Essameldein Fahim; Shereen Kotb Kotb Salem
6.

Strontium titanate nanoparticles modified denture base materials.

Pages 403-411
Diaa Asaad Elmwafy; Amr Mohamed Abdelghany
7.

The Biaxial Flexural Strength and Weibull Analysis of Polished and Glazed CAD/CAM Polymethylmethacrylate Provisional Material..

Pages 413-420
Soha Osama
8.

Influence Of Two Intrapulpal Depths On Fracture Resistance Of Endocrowns Restoring Maxillary Premolar Teeth Using Zirconia Reinforced Lithium Disilicate (In Vitro study)

Pages 421-426
Khaled Yehia Mahgoub; Tarek Salah el din Morsi; Ahmed Khaled Abofadle; Rafik K.G Mina
9.

Effect of Restoration Depth and Thermocycling on Color Matching of a Smart Single Shade Universal Resin Composite with the Surrounding Hard Dental Tissues

Pages 427-435
Sayed Mohamed Ghorab; Rabab Mehesen; Mohamed Samir El Nawawy; Hagag Abdel kader Mohammed
10.

Evaluation of Marginal Adaptation of Different Materials and Thicknesses of CAD/CAM Fabricated Occlusal Veneers

Pages 437-449
Samar Saeed Bedair; Ghada Ahmed Elzayat; Zainab Diaa Soliman
11.

Effect of different post space irrigation solutions on the bond strength of two types of post restoring anterior teeth (Invitro study)

Pages 451-459
Sameh Sherif Abou-steit; Faten Mohamed Ghonimy; Marwa Ayman Salem; Heba Sohail Badra
12.

Accuracy of different digital data acquisition work flows for full arch maxillary implant prostheses (an invitro study)

Pages 461-471
noha mohamed El Hussieny fayad; Ahmed Khaled Abofadle; Dina essam Essam Bahig
13.

Effect Of Three Different Bar Clip Materials on Retention of Implant-Supported Mandibular Overdenture: An Invitro Study

Pages 473-486
Mohamed Hosny Selem; Sara Ali ElKady; moataz Hassan; Iman A El-asfahani
14.

ASSESSMENT OF VARIOUS SURFACE TREATMENTS ON RETENTION OF POLYETHERETHERKETONE PREMOLAR CROWN

Pages 487-496
Sabry Ezzat Abdel alim; shams waz; Amr H Mostafa El-Bolok
15.

EVALUATION OF THE EFFECT OF COLORING TECHNIQUE ON SURFACE HARDNESS OF MONOLITHIC ZIRCONIA

Pages 497-505
Mohammad Mamdouh; Shereen Kotb Salem; mostafa elhoussieny mohamed
16.

Different Implant Supported Modalities of Completely Edentulous Mandible

Pages 507-517
Heba Elbelacy; Maie F. Khalil; Asmaa N. Elboraey
17.

Evaluation of Marginal Bone Height Changes in implant-supported mandibular overdenture retained with Two Different Materials of Bar Attachments.

Pages 519-530
Amr Salah el din Gomaa; Omayma Ahmad Mohamad; Sara Maher Shaaban
18.

Radiographic evaluation of alveolar bone height changes around mandibular implants with different surface treatments supporting mandibular overdenture (A split mouth comparative study )

Pages 531-541
Doaa Mahmoud Elkady; islam shawky shaker
19.

The effect of posterior dental implant angulations in all-on-four treatment concept on the stresses induced at implant/crystal bone interface using glass fiber reinforced composite framework: Three‑dimensional finite element analysis

Pages 543-550
Ahmed Magdy Sayed; Sara medhat mohamed
20.

Three Years Clinical Evaluation of Lithium Disilicate and Hybrid Nano-ceramic CAD/CAM Endocrowns (Randomized Clinical Trial)

Pages 551-561
Marwa Ayman Salem; Shereen Hafez Ibrahim; Sameh Sherif Abou-steit
21.

Effect of Divergence Angle and Intra-Pulpal Depth on Marginal Adaptation of Endo-crowns (In Vitro Study)

Pages 563-566
Ahmed A Elhadary; Ahmed Ezzat Thabet; Ahmed Khaled Abofadle; Moustafa noor
22.

Effect of Different Denture Materials on Stresses Transmitted to Peri-Implant Areas of Implant-Supported Mandibular Overdenture

Pages 567-573
Ahmed Abdelwahed Shaaban; Diaa Mohamed Zahran
23.

In Vitro Evaluation of The Marginal Adaptation of Monolithic Ceramic Crowns Fabricated with Different Margin Designs Using Novel CAD/CAM Material After Thermomechanical Aging.

Pages 575-585
Hanaa Sayed Nassar; Ebtesam Osama Abo El-Mal
24.

The effect of cyclic loading and surface treatment techniques on the Marginal gap of zirconia Inlay retained fixed partial denture with three different designs.

Pages 587-598
talaat Mohamed Samhan; Tarek Salah; Hanaa zaghloul; Nancy Ezz el din
25.

Influence of Proximal Box Elevation Using Two Different Resin Composite Viscosities on The Marginal Adaptation of CAD/CAM Ceramic Overlays Subjected to Thermomechanical Aging. An In Vitro Study

Pages 599-609
Hanaa Sayed Nassar; Mona Essam El Din Eliwa