EKB Journal Management System
1.

Influence of Preparation Design on Fracture Resistance of Hybrid Ceramics Occlusal Veneer

Pages 1421-1430
Ahmed Kamal Mohamed; mohamed gamal Hussein; Moustafa Sherief Mohamed; Cherif Adel Mohsen
2.

Evaluation of Tearing Strength and Anti-Microbial Property of Self-Disinfectant Alginate versus Conventional Alginate

Pages 1431-1444
moamen ahmed abd elrazik; Mahmoud Hassan El Afandy; Marwa Kothayer
3.

Effect of Finishing Technique on Color Stability of Dental Ceramics

Pages 1445-1452
Aliaa Ali Al-Qousy; Moustafa Sherief Mohamed; mohamed gamal Hussein; Cherif Adel Mohsen
4.

Evaluation of the push out bond strength of fiber post system and PolyEtherEtherKetone (PEEK) post after different surface treatments. (An Invitro study)

Pages 1453-1464
Eslam Mostafa Abd El-gawad; Cherif Adel Mohsen; Amna Taha Mohammed
5.

CLINICAL EVALUATION OF FULL DIGITAL WORKFLOW TO PROVIDE A PREFABRICATED IMMEDIATE RESTORATION AFTER SINGLE-IMPLANT PLACEMENT

Pages 1465-1475
Haitham Ahmed Ismail; muhamed badee El-Danasory; Yasmin Ashor Tahmawy; Naema Ammar; Mohamed Moataz Khamis; Ahmed M Abdelhamid; Mariam M. Bahgat
6.

EVALUATION OF SHEAR BOND STRENGTH OF MULTILAYERED ZIRCONIA AND LITHIUM DISILICATE CERAMIC TO RESIN CEMENT

Pages 1477-1488
Rana Khaled Ahmed; Mohammed Moustafa Shalaby; Raiesa Mohamed Hashem
7.

The Effect of Heat Treatment and Surface Energy Alteration on Controlling the Long Term Stability of the Zirconia-Resin Bond

Pages 1489-1502
Abeer Taha M. Rashad; shams waz; Hanaa Saber Rabeae
8.

Influence of Reinforcement with Silicon Dioxide Nanoparticles on The Fracture Strength and Surface Roughness of Implant-Retained Mandibular Overdenture: An In Vitro Comparative Study

Pages 1503-1513
safaa Salah Ali; Sherief M. Abdelhamid; Mostafa El_-Sayed Abd El-haleem; Iman A El-asfahani
9.

NON-INVASIVE DIGITAL TECHNIQUE FOR EXAMINATION OF MARGINAL AND INTERNAL ADAPTATION OF DIFFERENT CERAMIC TABLE-TOPS

Pages 1515-1528
Rewaa G. Aboelhassan; Dina M. Nasr
10.

The influence of air abrasion and Er,Cr:YSGG laser on shear bond strength of cubic zirconia to two resin cement types.

Pages 1529-1535
Amira Said Abd Elsabour; Tarek Salah; Soha Osama
11.

Evaluation of color change and surface roughness for two indirect esthetic materials submitted to different immersion protocol.

Pages 1537-1545
Asmaa Fathy Mohamed; Shamss Wazz; Reem Gamal
12.

Fracture Resistance of Interim Restoration Constructed by 3D Printing versus CAD/CAM Technique in Different Oral Media (In Vitro Study)

Pages 1547-1555
abdelrahman rashad mohamed; Omaima El mahallawy; Raiesa Mohamed Hashem
13.

Effect of Copper Oxide Nanoparticles Incorporation on the Mechanical and Surface Properties of Heat Polymerized Denture Base Resin: An In Vitro Study.

Pages 1557-1565
Enas ElSayed Mesallum
14.

Effect of layer thickness, inner structure, and implant angulation on the accuracy of 3D printed models with implant analogs

Pages 1567-1575
Ingy Nouh; Nancy Rafla; Omar Ahmed El Sergany
15.

MARGINAL FIT AND FRACTURE RESISTANCE EVALUATION OF INLAY RETAINED FIXED PARTIAL DENTURE WITH TWO DIFFERENT CAVITY DESIGNS

Pages 1577-1585
Doaa Ali Ahmed; Shereen Kotb Salem; Raiesa Mohamed Hashem
16.

Evaluation Of The Effect Of Different Surface Treatments On Micro Tensile Bond Strength And Color Stability Of Hybrid Ceramic Repaired With Composite

Pages 1587-1597
Alaa Samir Ibrahim; shams waz; Hanaa Saber Rabeae
17.

Effect of different Extra coronal attachment designs on the biological consideration and bacterial growth in mandibular Kennedy class II cases (A Randomized Clinical Trial)

Pages 1599-1608
Mai Adel Helmy; Safaa Kamel; Marwa Kothayer
18.

Assessment of ceramic repressing effect on color and translucency of pressable ceramic materials

Pages 1609-1620
Sara Hassan Mohamed; Shams Waaz Amgad; Ahmed Mohamed Bakry
19.

Effect of Different Denture base Materials on Stresses Transmitted to supporting structures of Implant-supported Mandibular Overdenture

Pages 1621-1628
Ahmed Abdelwahed Shaaban
20.

Evaluation of motility of solid versus hollowed ocular prosthesis. A double blinded cross over randomized clinical trial

Pages 1629-1635
abdelrhman hassan mahmoud; doaa tawfik hassan; Emad Mohammed Agamy
21.

Effect of different types of reinforcement denture base materials on implants retained overdenture

Pages 1637-1649
May Mahmoud Hassan; Heba Abd Elrahman Elbelacy
22.

Retention And Functionality Assessment for Two Design of Interim Maxillary Obturator

Pages 1651-1659
Mohamed Denewar; Ahmed Khalifa
23.

Comparing the effect of canine guided versus group function occlusion on the vertical bone loss around implants retaining mandibular hybrid prostheses

Pages 1661-1670
nour magdy kodera; Ahmed mohamed osama ahmed shawky; Dina Essam Bahig
24.

Comparative Evaluation of Candida Albicans Adherence, Flexural strength and Water Sorption of Orthodontic Self-Cure Acrylic Resin Modified with 2-Methacryloyloxyethyl Phosphorylcholine by Two Different Techniques: in-vitro Study

Pages 1671-1681
Tayseer Maaly; mahmoud Ashraf; Marwa Aly Tawfik
25.

Comparative stress analysis study between different coping materials in complete overdenture cases (An in-vitro study)

Pages 1683-1691
Sahar Ahmed Ghorab; Mohamed Zawahry; Engy Hussein Mahmoud
26.

Laser Micromachining of Titanium Aluminum Vanadium Alloy Rods

Pages 1693-1698
Mohamed Ahmed Alkhodary
27.

Comparison of three different dental implant biological coating techniques

Pages 1699-1703
Mohamed Ahmed Alkhodary
28.

Effect of Repolishing on Color Stability of Hybrid Ceramics after Immersion in Chlorhexidine Mouth Rinse

Pages 1705-1713
Rawan Ahmed Rabiee; Waleed Mohamed Elshahawy; Abeer Atef Younes
29.

ASSEMENT OF FRACTURE RESITANCE OF THERMOCYCLED AND NON THERMOCYCLED ENDOCROWN AND POST CROWN FABRICATED ON MAXILLARY PREMOLAR USING VITA ENAMIC. IN VITRO STUDY AND FINITE ELMENT ANALYSIS

Pages 1715-1726
Nesma Mahmoud Essa; Manal Rafei Hassan Abu-Eittah
30.

The Influence of Different Surface Treatments on Bond strength of CAD/CAM Fabricated Ceramic Restorations

Pages 1727-1739
Shaimaa Ahmed Abo El-Farag
31.

Hardness and elastic modulus properties of PEEK material as an alternative to Poly Methyl Metha Acrylate (in- vitro study)

Pages 1741-1747
mohamed quassem; mamdouh mansour; wesam elsayed badr; mohamed sayed etman; belal alwakeel; faried hamam
32.

The Impact of Different Preparation Designs on Marginal Adaptation of Pressable Ceramics (An In-vitro Study)

Pages 1749-1759
Mohammed Deeb; Enas Fathelbab Abdelhalim; Hanaa Saber Rabeae
33.

Marginal Integrity of Different CAD/CAM Monolithic Ceramic Crowns with Vertical and Horizontal Finish Line Preparations

Pages 1761-1759
Shereen Kotb Salem; Rasha Sayed Asaad
34.

In-Vitro Evaluation of Strain Induced by Various Extra Coronal Attachment Materials in Removable Partial Dentures Restoring Mandibular Kennedy Class I Following Clinical Simulation for One Year

Pages 1771-1790
Yasser Mohamad Shawky
35.

Comparison of peri-implant bone level in mandibular implant overdenture retained by locator attachment with varying retentive insert materials: A retrospective study

Pages 1791-1796
Mohamed Said
36.

Fracture resistance of bi-layered and translucent zirconia after thermo-mechanical fatigue

Pages 1797-1811
Abdulmoein Ahmad Alzhairi; Ahmed Hamdy; mai hesham abdelrahman; Faisal safwat Hamza
37.

Comparing the fracture resistance of three different CAD/CAM occlusal veneers manufactured with different thicknesses. An in vitro study.

Pages 1813-1826
Zainab Diaa Soliman; Samar Saeed Bedair
38.

Influence of Thickness of Endocrown and Ceramic Translucency on The Degree of Conversion of Resin Cement (In Vitro Study)

Pages 1827-1835
Sara Shoukri Mousa Bih; Maged Zohdy; Sara Mehanna Foudah; Engy Adel Ahmed Farag