EKB Journal Management System
1.

Biting force of patients rehabilitated with Precision Attachments Unilateral Removable Partial Denture

Pages 579-587
Hussein Elcharkawi; MOHAMED ABDALLA; Nada khourazaty
2.

EFFECT OF DIFFERENT SURFACE TREATMENT PROTOCOLS ON THE RETENTION OF POSTERIOR PEEK CROWNS (A randomized invitro study)

Pages 589-596
Kareem Abdel Motaleb; Hesham Katamish; Reham Elbasty
3.

Influence of material type and preparation depth on the fracture resistance of endocrown restoration

Pages 597-605
Abdallah Mohamed EL-hosary; Walid Al-Zordk; abdelreheem abdelkader; Mohamed Ghazy
4.

Mini implants versus conventional diameter implants for 4-implant-supported mandibular overdentures. One year randomized prospective clinical and radiographical study

Pages 607-619
Amr Emarah; Mohammed Hamed; Inass AbuElmagd; Shahinaz Mohamed
5.

Bone Loss Around Mandibular Implant Supported Overdentures. A Seven Year Follow Up.

Pages 621-630
MOHAMED ABDALLA; Naglaa Nassouhy
6.

PEEK Versus Metallic Framework For Extracoronal Attachment Mandibular Bilateral Distally Extended Removable Dental Prosthesis (RDP) Evaluation of Abutments Bone Height Changes and Patient Satisfaction. A Randomized Clinical Trial.

Pages 631-645
nourhan ragheb; Mohamed Elgamal
7.

Effect of thermo-cycling on retentive forces of different esthetic thermoplastic clasp materials for removable partial denture. (In-vitro comparative study)

Pages 647-658
eman mohammed; Mohammed El Sayed
8.

Comparison of Bond strength between acrylic based soft liner and two different denture bases (3Dprinted and conventional denture base).

Pages 659-663
Mohamed mahmoud dohiem
9.

Effect of Er,Cr:YSGG LASER bio-modulation of osteotomy site on peri-implant crestal bone level in lower single fixed detachable prosthesis

Pages 665-675
Hesham Alam; Mona Aboelnagga; Amany Elsayed
10.

Accuracy of fit of all on-four prosthesis constructed from 3D printing and milling technologies

Pages 677-682
Mohamed mahmoud dohiem
11.

Evaluation of Bone Height Changes in Three Implants Retained Mandibular Overdenture Using Three Different Attachment Design. A Randomized clinical trial.

Pages 683-696
Nouran Abdel Nabi; nourhan ragheb
12.

Peri-implant strains with ball and telescopic attachments for implant supported maxillary overdentures. An invitro strain gauge analysis

Pages 697-706
Amr Emarah; Shahinaz Mohamed
13.

Chewing efficiency and masseter muscle activity of conventional dentures, implant-supported overdentures, and fixed hybrid prostheses in patients with atrophied mandibles. A cross-over study

Pages 707-718
Mohamed Elgamal; Osama Askar
14.

Implant supported partial overdenture in esthetic zone (preliminary report)

Pages 719-732
Ehab Elsaih; Ahmed Salem; Bassant Mowafey
15.

Effect of Different Denture Base Materials on Normal Human Fibroblast Cell Line: An In Vitro Comparative Study

Pages 733-741
Bassem Abdelhameed; Hala ahmed el kammar
16.

Evaluation of the effect of adding zirconium or titanium oxide powder to heat cured acrylic resin on the fracture resistance of denture base of the mandibular implant supported overdenture. An invitro study

Pages 743-748
ahmed fayyad
17.

Evaluation of Internal Fit of CAD/CAM Implant Abutments with Hybrid and Internal Hex Connections Using Different Materials

Pages 749-761
Khaled Elbanna; Alaa Alqutub; Shereen Kotb Salem
18.

FATIGUE RESISTANCE OF OCCLUSAL VENEERS CONSTRUCTED FROM DIFFERENT CAD/CAM MATERIALS WITH DIFFERENT OCCLUSAL THICKNESSES.

Pages 763-781
Amira Elsharkawy
19.

CAD/CAM Fabrication of a Patient-specific PEEK Implant for Marginal Mandibular Reconstruction: A Technical Report

Pages 783-786
Mohamed Said; Mohamed Shady; Mohamed Elmetwally; Marco Youssef; Salah Hegazy
20.

Zirconia versus cobalt chromium meshwork reinforcement of implant-assisted mandibular overdenture

Pages 787-794
Mohamed Ahmed Alkhodary
21.

Early Loading of Short and Standard-Length Dental Implants Retaining Mandibular Kennedy Class I Removable Partial Dentures

Pages 795-806
Mohamed Ahmed Alkhodary; Abeer Mohamed Ettesh
22.

Biocompatibility of conventional acrylic resin versus modified with titanium dioxide nanoparticles in maxillofacial prosthesis. A parallel randomized control trial

Pages 807-815
Noha Aligamaleldin; Nancy Elsherbini
23.

Gold alloy metal clip versus nylon plastic clips of stress-free implant (SFI) bar used for immediately loaded 4-implant assisted mandibular overdentures. One-year randomized trial evaluating marginal bone loss and patient satisfaction.

Pages 817-830
Waleed Maryod; Engy Salam; Ghada Alkaranfilly
24.

In vitro retention overall pull-off force of telescopic crowns made from two different materials at three taper angles

Pages 831-838
lamis Enaba
25.

FRACTOGRAPHIC ANALYSIS OF MONOLITHIC AND BILAYERED ZIRCONIA AFTER THERMO-MECHANICAL FATIGUE AND FRACTURE STRENGTH TEST

Pages 839-845
abdulmoein Alzhairi; Ahmed Hamdy; Faisal Hamza
26.

Evaluation of the fracture resistance of three different implant supported overdenture base materials

Pages 847-852
nada el khourazaty
27.

Treatment protocol for temporomandibular joint derangement using an anterior repositioning splint with modification (one year prospective study).

Pages 853-873
Ehab Elsaih; Bassant Mowafey; Fatma Ata; Ahmed Salem
28.

Shear Bond Strength of Various dental Ceramics Treated with two Techniques of Surface Treatment after Thermocycling

Pages 875-883
Raiesa Mohamed Hashem
29.

Prosthetic complications in immediately loaded All-on-Four mandibular prosthesis using titanium wire reinforcement versus non reinforced temporary framework. A Randomized Clinical Trial

Pages 885-892
ahmed fayyad
30.

Bonding performance of self adhesive flowable composite to dentin pretreated with four different natural matrix metalloproteinases inhibitors

Pages 893-914
Dina El- Refai
31.

The Effect Of Silver Versus Titanium Dioxide Nanoparticles On Poly methylmethacrylate Denture Base Material

Pages 915-921
Yasmine Thabet; Dina Moustafa; Sara El Shafei
32.

Peri-implant marginal bone loss and oral health-related quality of life in patients treated by mini-implant-retained mandibular overdentures with different occlusal schemes (lingualized, monoplane and bilateral balanced): A randomized clinical trial

Pages 923-936
Iman El-asfahani; Eman Helal
33.

Dynamic fatigue resistance and marginal leakage of endocrowns fabricated with two different CAD/CAM ceramic materials.

Pages 937-947
Mohamed Mohamed; Hanaa Nassar
34.

The Effect of Aging upon Retentive Characteristics of Two Different Stud Attachments In vitro Study

Pages 949-954
Khaled Abdelwahab
35.

Assessment of primary stability and bone density of maxillary implant overdenture following Osseo densification concept.

Pages 955-963
Khaled Abdelwahab; alaa nawwar; Nada El Khourazaty